AFI

This horn is built to last! The sound unit is totally sealed against weather and spray. The cover, diaphragm, and mounting bracket are all made from tough, Type 304 stainless steel. Loud, 109 decibel blast. 1 year warranty. All AFI electric horns are American Boat And Yacht Council (ABYC) approved...

This tool holder is made from one-piece molded construction. It comes with a lifetime warranty. It will accommodate a pair of pliers, two fillet knives and multiple rig, lures etc.

Easily powers 22 inches x 22 inches arm/blade combinations. Accommodates blades from 16 inches to 24 inches. Factory pre-set sweep of 80? adjustable to 45?, 60?, 80? or 110?. 5/8 inch diameter shaft, 2-1/2 inch shaft length. Corrosion-resistant casing. Includes 5 amp fuse and holder along with stainless steel fasteners...

Teak deck steps provide great traction and safeguard against slipping and falling. Pre drilled for mounting. 6" x 15".

White poly platforms are weather and UV resistant and virtually maintenance free. Brackets are sold seperatly. Note, 2 brackets are needed for 24" size , 4 brackets are needed for 72" and 84" versions. 24" Model 23-1/2"W back, 21"W front, 17-1/2"D and 5/8" thick. This item weighs 9 pounds and...

Features a waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic. Adjustable right or left self parking with 80 degrees or 110 degrees adjustable sweep for external use in open cabin boats.

Model # 60993 Platform : 24" hight : 7" Length : 14" 1lb

Exterior grade teak binocular rack comes in this small size to accommodate your binoculars without a compass. Small size measures 7 1/4" x 2 5/8" inside.

NEW ,, Exclusively designed for Boater's World ! Model: 63316

This horn is built to last! The sound unit is totally sealed against weather and spray. The cover, diaphragm, and mounting bracket are all made from tough, Type 304 stainless steel. Loud, 116 decibel blast. Low frequency carries long distances over water. 1 year warranty. All AFI electric horns are...

You need an air horn if you want a big rumbling sound. AFI's dual-trumpet airhorn puts out a loud 121 decibles! It's low frequency carries long distances over water. The trumpets are classy chrome-plated brass. The non-corrosive LEXAN diaphragm lasts indefinitely around the water. Includes compressor, air tubing, fittings, and...

5' L x 1 3/8" H x 3/4" inset

Natural teak flag poles maintain their good looks with a minimum of maintenance.

Fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic motor with a Knurled drive shaft and solid brass arm drive nut. Adjustable right or left self-parking. Factory pre-set sweep of 110?, adjustable to 50?, 65?, 80? or 110?.Compact size: 6-5/8 inches L x 3-3/8 inches W x 2...

5' , with outer diameter of 7/8" and inside edge of 5/8"

This horn is built to last! The sound unit is totally sealed against weather and spray. The cover is made from long lasting, non-corrosive ASA black plastic.The diaphragm, and mounting bracket are made from tough, Type 304 stainless steel. Loud, 106 decibel blast. 1 year warranty. All AFI electric horns...

White

This horn is built to last! The sound unit is totally sealed against weather and spray. The cover, diaphragm, and mounting bracket are all made from tough, Type 304 stainless steel. Loud, 106 decibel blast. 1 year warranty. All AFI electric horns are American Boat And Yacht Council (ABYC) approved...

These AFI trumpet horns have a 100percent stainless exterior and diaphragm. These horns meet or exceed requirements for boats to 12 meters. 20percent louder than any other horn available!

This easy to install teak paper towel rack will be sure to save space onboard! 12 1/4" W x 1 7/8" H x 4 3/8" D.

These AFI trumpet horns have a 100percent stainless exterior and diaphragm. These horns meet or exceed requirements for boats to 12 meters. 20percent louder than any other horn available!

These air horns by AFI are built using only high quality chrome on solid brass exteriors and non-corrosive Lexan interiors. Each horn come complete with all mounting hardware, 12 Volt/12 psi air compressor, air-tubing, and all necessary fittings. All Full Blast air horns meet or exceed USCG requirements for boats...