Thomson

Thomson is famous for their strong, reliable and lightweight stems and seatposts, now they have brought their knowledge to one more area of your cockpit, with the new Thomson Seat Clamp.

The legendary design and construction of the proven Elite seatpost by Thomson, in a layback design for riders desiring a bit more setback. Post and cradle are constructed from one piece of 7000-series aluminum. Please note: Thomson does not recommend the use of shims on their seatposts. Second to none...

The design team for the new Thomson 31.8 stems had a tough goal: make a stem better than the Thomson Elite Road and Mountain Stems. That was a tall order, given the popularity of the Elite models. They've done it, though - the new X4 is stronger AND lighter than...

Top cap for threadless headsets by Thomson.

The Thompson Elite 30.9mm seatpost offers superior strength and minimum weight. Tube and head are integral-machined from a single piece of high-strength 7000-series aluminum, allowing higher strength at lower weights Natural ellipse bore inside tube provides optimum strength-to-weight ratio Long 1.6 in. (41 mm) seat rail grip length helps prevent...

Replacement stem bolts for Thomson stems.

The Thomsom Elite Stem is machined 7000-series extruded bar stock with custom heat-treated and corrosion resistant bolts intended for mountain use. Weight: 200 grams (110mm) Material: Extruded, Machined 7000 Aluminum Feature: Internal steerer clamp, Four bolt plate Clamp Size: 25.4     

The Thompson Elite 27.2mm seatpost offers superior strength and minimum weight. Tube and head are integral-machined from a single piece of high-strength 7000-series aluminum, allowing higher strength at lower weights Natural ellipse bore inside tube provides optimum strength-to-weight ratio Long 1.6 in. (41 mm) seat rail grip length helps prevent...

The Thompson Elite 31.6mm seatpost offers superior strength and minimum weight. Tube and head are integral-machined from a single piece of high-strength 7000-series aluminum, allowing higher strength at lower weights Natural ellipse bore inside tube provides optimum strength-to-weight ratio Long 1.6 in. (41 mm) seat rail grip length helps prevent...

The legendary Thomson Elite, in a downsized clamp version for road use. With two bolts instead of four, it shaves grams but still provides similar stiffness to the MTB Elite stem. 100% Made in the USA Smooth-edged clamp for compatibility with carbon barsQ49 grams (110mm long) Machined from 7000-series aluminum...

The Thomson 25.4x200mm BMX seatpost uses a 7mm rail clamp and features a 41mm seat rail grip length. Post and cradle machined from one piece of 7000 aluminumT1mm seat rail grip length Seatpost Type: BMX Clamp Style: Standard Rails Weight:188 g Length: 200 mm Material: Aluminum Seatpost Diameter: 25.4 mm...

Thomson Masterpiece Clamp assembly.

The gold standard! We recommend these without hesitation due to their superb strength, light weight, and no-slip design. Please note: Thomson does not recommend the use of shims on their seatposts. Weight: 290 grams (27.2, 400mm size) Material: One Piece Extruded Aluminum Feature: Twin bolt seat adjustability

 Thomson steerer tube clamp with 2 bolt.

Thomson 12° clamp assembly.

Thomson 12° clamp assembly.

The Thomson Masterpiece Seatpost accommodates seat tube angles of 62 degrees or more. Please note: Thomson does not recommend the use of shims on their seatposts. All surfaces machined to remove weight Accommodates seat tube angles of 62 degrees or moreT1mm seat rail grip length Seatpost Type: Rigid Clamp Style:...

It's the legendary Thomson Masterpiece seatpost, in a 16mm setback design for riders/frames that need offset toward the rear of the bike. Please note: Thomson does not recommend the use of shims on their seatposts. Same proven, reliable and easy to adjust 2 bolt headQ00% made in the USA The...

Shim turns 1 1/8" stem to fit 1" threadless steerer tubes. For use with Thomson stems only, this is the only shim specified by Thomson for use with their stems

The Thomson Elite X4 31.8mm stem is designed to have the best combination of stiffness, light weight, strength, and durability. Machined from 7000-series aluminum; the stem is a 1-piece design with no welds or joints New steerer clamps save about 20g of weight Wide clamp length (48mm) and patent pending...

Shave some grams with the Thomson Masterpiece post. It features a feathery shaft with machined surfaces to reduce weight. Weight(30.9 mm): 191 gW000 series aluminum construction Please note: Thomson does not recommend the use of shims on their seatposts.

Thomson seatpost bolt, nut and washer.

Replacement faceplates for assorted Thomson stems.

The Thomson X2 Road Stem features a new steer tube clamp assembly that is lighter than Thomson's popular Elite style. 31.8 bar clamp diameter with smooth edges for carbon bar compatible Machined 7000 series extruded bar stock Bolts are custom heat treated with corrosion preventative platingQ49g, 110mm length Stack height...

Thomson X4 One Point Five Stems feature Custom heat-treated bolts with corrosion-preventative plating. Machined 7000-series extruded bar stock with new steerer clamp assembly Custom heat-treated bolts with corrosion-preventative platingS1.8mm bar clamp with smooth edges for carbon bars; 1.5" steererT1mm height, 169 grams