Fitness > Weight Training

Ladder has 4 height adjustments. Four foam rollers provide comfort and support. Additional board may be added to other side. Ships assembled via freight. 38 H x 24 W x 75 L. Strength Equipment Frame and Fabric Specifications: 2 x 2 square 11 gauge tubing Welded frames Pads are 3/4...

The offset bar allows squats to be done in a more vertical posture, producing intensified quadriceps involvement. Cambered end design relieves much of the lower back stress normally associated with a back squat. All steel design with padded shoulder harness. Please Note: This item CANNOT ship to P.O. Boxes, APO,...

18 x 30 spotter stand for the Incline Bench Press Machine . Please Note: This item CANNOT ship to P.O. Boxes, APO, or FPO Addresses. It CAN ONLY ship to a Street Address.

A convenient place for chalk during competition and practice. Please Note: This item CANNOT ship to P.O. Boxes, APO, or FPO Addresses. It CAN ONLY ship to a Street Address.

Welded frame. Cross bars are bolted for easy delivery and setup. Bar rests are every 6. Extended lower frame for safety. Ships unassembled via freight. Strength Equipment Frame and Fabric Specifications: 2 x 2 square 11 gauge tubing Welded frames Pads are 3/4 plywood covered with ensolite padding and genuine...

Round 2 tubing for comfort. Grip are spaced 19 apart. Bolts to the wall. Hardware not included. Please Note: This item CANNOT ship to P.O. Boxes, APO, or FPO Addresses. It CAN ONLY ship to a Street Address.

Just turn and lock each bar in to place on the PowerMax Lifting System to create a dip station. Heavy duty 1 1U4 schedule 40 pipe and a large gusset provide outstanding stability. Handles are angled to provide ergonomically correct grip spacing for athletes of all sizes. Please Note: This...

This bar and plate holder fits all sizes of Olympic plates and lifting bars. It includes end caps to protect plates from abrasions and rubber around the opening of the bar holder to protect the bar from scratches. Please Note: This item CANNOT ship to P.O. Boxes, APO, or FPO...

Hand placements made of 2 round tubing. Grips are placed 19 apart and 55 off the floor. Double stand can be used by two athletes simultaneously. Both ship assembled via freight. Please Note: This item CANNOT ship to P.O. Boxes, APO, or FPO Addresses. It CAN ONLY ship to a...

Perform weighted step ups safely on this adjustable box. Four height adjustments: 14, 16, 18, 20. Reinforced plywood top coated with slip resistant paint. Top measures 20 x 28. Ships assembled via UPS. Will accommodate up to 500 lbs. Please Note: This item CANNOT ship to P.O. Boxes, APO, or...

Constructed of 11 gauge, 2 welded square steel tubing. Fixed uprights. Heavy foam padding on 3/4 painted plywood with durable vinyl covering. Black powder coat finish. Ships partially assembled via freight. Black upholstery only. Strength Equipment Frame and Fabric Specifications: 2 x 2 square 11 gauge tubing Welded frames Pads...

Black oxide bar with 700 lb. capacity and thick 30mm grip diameter. Set includes a pair of each of the following; 45 lb., 35 lb., 25 lb., 10 lb. and 2.5 lb. plates and 4 each of the 5 lb. plates, 1 each 700 lb. Olympic black oxide bar, and...

For use with any cable assisted weight machine. Chrome finish. Please Note: This item CANNOT ship to P.O. Boxes, APO, or FPO Addresses. It CAN ONLY ship to a Street Address.

Rugged welded steel constructed rack holds most hexagonal, pro-style and chrome dumbbells. Trays are angled slightly for better access to dumbbells. Long rack holds 15 - 19 pairs of dumbbells. Short rack holds 9 - 12 pairs. Weights shown are not included. Set up dimensions are 47H x 45W x...

Work hamstring, gluteus and spinal erector muscle groups in perfect coordination. Hip plate adjusts to desired height to fit athletes of all sizes. All steel construction with durable powder-coat finish. Upholstery is dense foam with durable vinyl covering. Ships unassembled via freight. Please Note: This item CANNOT ship to P.O....

Gray baked enamel finish with ergonomic handles. Dumbbells up to 10lbs have cast handle, and dumbbells over 10lbs have solid knurled handle. Precision cast with raised numbers. Please note this item is sold individually. There is no actual image of this item. The image shown is representative only. The actual...

92 x 73 dimensions allow for a full array of Olympic lifts within a minimal amount of space. Layered to dampen a heavy load, this platform is inside a frame constructed from powder coated 1U4 x 1 1U2 x 1 1U2 steel angle. The Elite platform has a base layer...

92 x 73 dimensions allow for a full array of Olympic lifts within a minimal amount of space. Layered to dampen a heavy load, this platform is inside a frame constructed from powder coated 1U4 x 1 1U2 x 1 1U2 steel angle. The Elite platform has a base layer...

Weight carriage is center pulled on steel guide rods to reduce friction. Seat pad is removed to perform low row exercises. Adjusts to fit athletes of all sizes. Lat bar and rowing triangle attachments are included. Uses Olympic plates. Ships assembled via freight. Strength Equipment Frame and Fabric Specifications: 2...

Rugged welded steel constructed rack holds most hexagonal, pro-style and chrome dumbbells. Trays are angled slightly for better access to dumbbells. Long rack holds 15 - 19 pairs of dumbbells. Short rack holds 9 - 12 pairs. Ships assembled. Weights shown are not included. Please Note: This item CANNOT ship...

Compact storage unit for approximately 44 pairs of neoprene dumbbells (not included). Please Note: This item CANNOT ship to P.O. Boxes, APO, or FPO Addresses. It CAN ONLY ship to a Street Address.

Attach this plate and bar holder to the PowerMax Lifting System to provide convenient use and storage of bars and Olympic plates of all weights. Please Note: This item CANNOT ship to P.O. Boxes, APO, or FPO Addresses. It CAN ONLY ship to a Street Address.

Modular design allows you to build the PowerMax Lifting Station specifically for your needs. Build a comprehensive lifting station initially or start out with the basics and add accessory components over time. Constructed from 2 x 2 x 11 gauge steel with powder-coat finish. Arched top supports are designed to...

Portable bar stands for performing squats and other exercises. Bar height is adjustable from 44 to 64 in 4 increments. Wide, stable base. Bar and plates not included. Strength Equipment Frame and Fabric Specifications: 2 x 2 square 11 gauge tubing Welded frames Pads are 3/4 plywood covered with ensolite...

Precision cast, wide flange Olympic plates. Machine drilled holes. Black stain enamel. Sold individually. Please Note: This item CANNOT ship to P.O. Boxes, APO, or FPO Addresses. It CAN ONLY ship to a Street Address.