Fishing > Fishfinders & Depth Sounder Accessories

Speed Sensor Temperature and Speed Sensors are an optional accessory for many Humminbird fishfinders. The sensors provide quick response to changes, and readout from 2 to 70 MPH for speed, and from 25 degrees to 99 degrees for temperature. Description: Speed Sensor, 20 ft cable, transom mount. Speed range of...

Unit Cover The Unit Cover protects the unit when not in use. Protects from debris and scratches Description: Protective hard cover for all 700 Series products. Color: white. Not for use while trailering boat. For Use With: 717, 727, 737, 747C, 755C, 757C, 767, 777C2, 785C2, 787C2, 797C2

Temperature Sensor Temperature Sensors are an optional accessory for many Humminbird fishfinders. The sensor provides a quick response to changes, and readout from 25 degrees to 99 degrees. Description: Temperature Sensor, 20 ft. cable. Temperature range of 25-99.9 degrees F. For Use With: Wide Eye, Wide View, Wide Vision, Wide...

AD-629 Transducer Adapter The transducer adapter cable let many previously installed 2 pin transducers work with new Humminbird models with a 7 pin transducer, greatly simplifying the upgrade process to a new model. *Not including the 947c 3D Combo, Matrix 47 3D, 987c SI Combo or 981c SI

Bronze Thru Hull Transducer Bronze Thru-Hull Transducers are for large boats and for boats with in-board motors that make typical Transom Mount Transducers ineffective. They are not recommended for trailered boats as the transducer is not flush with the hull. Bronze Thru-Hull Transducers require that a hole be drilled in...

HUMMINBIRD MHX XMK KAYAK TRANSDUCER MOUNTING KIT

Plastic Thru Hull Transducer Plastic Thru-Hull Transducers are for large boats and for boats with in-board motors that make typical Transom Mount Transducers ineffective. They are not recommended for trailered boats as the transducer is not flush with the hull. Plastic Thru-Hull Transducers require that a hole be drilled in...

Serial to USB Adapter Description: This adapter cable converts an AS PC2, which has a serial port connector, to a USB connection. For Use With: Matrix 10, Matrix 12, Matrix 15, Matrix 17, Matrix 20, Matrix 25, Matrix 27, Matrix 35, Matrix 37, Matrix 47 3D, Matrix 55, Matrix 65,...

Temp/Speed Extension Cable The Temperature and Speed Extension Cables extend the location of Temp/Speed sensors up to 50 feet without affecting accuracy or performance. All cable end connectors are gold plated for corrosion resistance. Description: Temp/Speed extension cable, 10 ft. For Use With: WIDE EYE, WIDE VIEW, WIDE VISION, WIDE...

Transducer Extension Cable The Transducer Extension Cables extend the location of transducers up to 50 feet without affecting accuracy or performance. All cable end connectors are gold plated for corrosion resistance. Description: Transducer Extension Cable, 10 ft. For Use With: 300TX, 400TX, Tour Series, Wide Eye, Wide View, Wide Vision,...

Trolling Motor Transducer Trolling Motor Mount Transducers are designed to mount on to the body of most trolling motors. A low profile shape reduces drag in the water and minimizes interference with weeds. Trolling Motor Transducers are often used in conjunction with the standard Transom Mount Transducer and connected by...

UC-4 Unit Cover Fits all 300 and 100 Series

HUMMINBIRD UC-5 COVER FOR 900 SERIES

Puck Transducer Description: Puck transducer . Single/Dual Beam, 20/60 degree, 200/83 kHz with built in temperature For Use With: Legend ID40, Piranha 5, PiranhaMax 10, PiranhaMax 15, PiranhaMax 20, Matrix 15, Matrix 17, Matrix 25, Matrix 27, Matrix 55, Matrix 65, Matrix 67, Matrix 97, FF515, FF535, FF565.

Transducer Extension Cable 30 ft. cable The Transducer Extension Cables extend the location of transducers up to 50 feet without affecting accuracy or performance. All cable end connectors are gold plated for corrosion resistance. For Use With: 300TX, 400TX, TOUR SERIES, WIDE EYE, WIDE VIEW, WIDE VISION, WIDE 3D VIEW,...

HUMMINBIRD AD926 ADAPTER 7 PIN XDUCER TO 2 PIN UNIT

Angled Puck Transducer Inside Hull Transducers mount to the inside of most fiberglass boat hulls and transmit the sonar signal through the hull. On hulls with a deadrise less than 15 degrees, a flat bottom transducer should be used. For angles greater than 15 degrees, an angled transducer is recommended...

HUMMINBIRD ICE FLASHER SOFT SIDED CARRYING CASE

SD/MMC Card Reader Description: This card reader plugs into a USB port on a computer and allows your computer to read SD and MMC cards. This will allow you to update the software on your unit. This accessory also includes a 16MB MMC card. This product works with our 900,...

Humminbird SHS-7W Transom Mount Transducer

Transducer Mounting Hardware Transom Mounting Hardware is hardware for mounting High Speed Transducers to the Transom. Description: Mounting hardware for transom mount transducers. Includes the plastic bracket with plastic pivot. Not compatible with transducers that have a metal bracket. Used with the For Use With: WIDE OPTIC, WIDE PORTRAIT, WIDE...

Transom Mount Transducers Transom Transducers mount on the transom (back) of the boat in contact with the surface of the water. To prevent damage to the boat or transducer. Transom mount hardware is included with the transducer. Description: New transom mount transducer design. Single/Dual Beam, 20/60 Degree, 200/83 kHz. New...

HUMMINBIRD UC-6 COVER FOR 1100 SERIES

UC-M Matrix & 500 Series Unit Cover All Matrix (except Matrix 97) and 500 Series

HUMMINBIRD XBTH-9-QB-90-T BRONZE THRU HULL DEPTH/TEMP