Cycling > Tools

The Park Tools Cone Wrench set features a special "Y" head design that puts more material where it's needed for strength and durability. Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality. These wrenches are thin enough to use on the narrowest of...

An updated version of our popular CN-2 Cable Cutter, the CN-4 has a better feel, a stronger spring, and a redesigned head that cuts both cable and housing (including index housing) quickly and cleanly. Made of heat treated, high carbon tool steel, this new Cable and Housing Cutter is sure...

Don’t allow yourself to get stuck on the road or trail with a busted chain and a long hike ahead of you. Pack the 77 g Park Tool Mini Chain Brute Chain Tool-CT-5C with you and crank your way home. Easy use and shop performance is provided by the V-shaped...

Park Tool Accessory Tray #106 A great work stand accessory built to keep tools, lubes and spare partsclose at hand. The #106 installs easily utilizing our exclusivereceiver pod accessory system found on PRS-15, PCS-10 and PCS-11 RepairStands.   Perfect as a convenient way to keep tools and supplies handy in...

The Park Tools DAG-2 Derailleur Hanger Alignment Gauge utilizes a longer measuring pointer, longer threaded stud and a longer, narrower alignment boss to fit a wider variety of bikes.

The bike shop quality AWS-11 features 3mm, 4mm, 5mm, 6mm, 8mm (crank bolts, and 10mm (freehub) hex wrenches with precision chamfered tips for a tight fit. One-piece fiber-reinforced resin handle is lightweight, comfortable, slip-resistant, and 40% stronger than traditional steel handles. The perfect tool for home or professional mechanic.

The new BBT-9 Bottom Bracket Tool is designed to remove and install Shimano® Hollowtech II bottom brackets. Laser cut for a precise fit, one end of the BBT-9 securely engages the 16 notches of the bottom bracket cups, while the other end engages the 8 internal splines of the crank...

A clean chain is a happy chain, which means fewer headaches for the cyclist. Without having to remove the chain from the bike, the Cyclone involves a degreaser reservoir and hundreds of rotating bristles that wrap around the chain for thorough cleaning. Snap the unit around the chain, and rotate...

All Park Tool chain tools have replaceable pins. The CT-2 and CT-3 use a chrome colored pin approximately 22mm long, and the CT-5 uses a black shorter pin about 18mm long. The MTB-1 has a special pin as well.

Park Tool's patented GearClean Brush has a unique design. A large comfortable handle with a curved, toothed-end reaches dirt deep between the gears, even the narrow spaced 9 speeds. Tough nylon bristles clean the derailleur and chain. Saves wear and tear on your chain and freewheel. Works great on brakes...

The PH-T25 is Park's comfortable "P-handle" with a genuine Bondhus brand T25 Torx® Wrench on both the long shaft (for speed) and short shaft (for high torque) of the wrench. Fits the bolt heads found on many disc brake calipers and rotors. Includes "Speed Bearing" attachment for fast installation and...

A premium quality multi-tool that's small and light enough to slip into a pocket or seat bag. With 22 tools on board, you'll find yourself well-equipped for just about any repair on the road or trail. All tools are finely polished stainless steel or nickel plated steel. Unique three-piece design...

Designed to ensure a straight, clean cut on threadless forks, the SG-6 fits 1", 1-1/8" and 1-1/4" forks. A clean, straight cut is critical to ensure a properly adjusted threadless headset! Simply slide the guide onto any threadless fork, clamp it down, and cut using the narrow cutting slot. Heat...

Cut your sidewall on a rock and the tube will start squeezing through. It's nice when it happens twenty feet from the car, but we know that's never the case. The Emergency Tire Boot is a large fibrous patch designed to hold the tire together and get you out in...

The BT-2 "4th Hand" pulls cables tight, freeing up your hand to tighten bolts and nuts. A must for any shop, home, or professional's tool kit. Heat-treated steel chrome plated to resist wear

Park's internal seat tube clamp helps protect thinwall aluminum or fragile carbon fiber frames. Don't clamp the seat tube, insert this internal clamp and be worry free.

An increasing number of chains (SRAM, Wipperman) use a master-link type system for final chain assembly. This handy set of pliers helps you easily remove these master links, so the chain can be taken off the bike for cleaning or lubrication.

Park Tool PRS-21 Work Stand Same great stability, versatility and features as the PRS-20 Team RaceStand, yet weighs 35% lessΓÇöonly 13.5 lbs (6.2 kg). Built using acombination of steel for strength in joints and pivots, and aluminum tosave weight. The PRS-21 is the perfect stand to choose when size andweight...

Park Tool PTS-1 Tire Seater This tool is designed to quickly and easily “seat” stubborn tires.During inflation, tire beads often slip below the rim edge and aredifficult to pull out. Simply place the non-slip jaws on the tire andlift out. The Park Tool Tire Seater adjusts to various tire widths.It's...

The Park Tool SG-7 Oversided Adjustable Saw Guide accurately guides your hack saw when cutting steerers, integrated seat posts andeven airfoil shaped seat posts up to 3.5” (89mm) or round tubesfrom 1-1/4” (32mm) to 1-1/2” in diameter (45mm). The SG-7features a hardened steel body and molded contact pads to protect...

Park Tool TAP-3 Pedal Tap Set Clean out or restore damaged threads in crank arms with these pedaltaps. These taps can be used with either steel or alloy crank arms. Setincludes both right and left-hand threads. The 1/2" size is common on"one-piece" cranks.  Made of high carbon steel, precision ground,...

Park Tool TAP-6 Pedal Tap Set Clean out or restore damaged threads in crank arms with these pedaltaps. Sold as a set of right and left hand threads. Made of high carbonsteel, precision ground, and hardened to stay sharp, they cut easilyand fit all conventional tap handles. 9/16" 20tpi

The TNS-4 Threadless Nut Setter with Guide by Park Tools makes it quick and easy to install star-fangled nuts used with 1” and 1-1/8” threadless headset systems. Using a durable steel driver and built-in guide, the TNS-4 perfectly aligns the star-fangled nut and sets it to the proper depth every...

This kit combines Park's wildly popular GP-2 Super Patch Kit and TL-1 Tire Levers into a simple, economical kit. Three tire levers and a box with six glueless-style patches and one piece of sandpaper are included.

This large tray is ideal for holding small parts and tools. It features deep sides so small items stay put. A variety of slots and holes hold any tool. Fits all Park Tool Repair Stand, except PRS-2 OS and PRS-3 OS..