Voile Universal Puck Gasket - The Splitboard Universal Puck Gasket from Voile. Placed between the board topsheet and Universal Puck, the Puck Gasket helps provide secure placement of the Universal Puck. Sold individually..
Voile Hooks - Factory Boards - Voile Splitboard Hooks for factory-built splitboards..
Voile Climbing Wires - 58mm - Voile Splitboard Climbing Wires. Climbing wires greatly increase climbing efficiency in tour mode. Clear rubber tubing over climbing wire helps protect underside of binding or Voile Slider Track from excessive wear..
Voile Slider Track Binding Screws - Flat Head - The Splitboard Slider Track Binding Screws - Flat Head from Voile. These are spare parts and in most cases when mounting your bindings to the Slider Tracks you will use the mounting screws included with your bindings. When mounting bindings to the Slider Track always be aware of the screw length. If the screw is too long it will prevent the Track from sliding over the Universal Puck system.
Voile Climbing Skins - Gitty-up. The incredible grip, slide, and durability of the Voile Splitboard Climbing Skins will have your skier buddies bribing you to break trail. The Voile Splitboard Climbing Skins are splitboard-specific skins designed to get you into the backcountry. The Voile Tractor Skins' bomber riveted stainless steel tip-loops take the abuse of ascending and ensure they stay securely on your board. Voile used the most tenacious glue and super grippy hydrophobic nylon mohair to keep you ascending into thin air.
Voile Universal Interface (W/ TRACKS) - Factory Boards - Factory-built splitboards typically come with Voile Tip Clips and Voile Hooks pre-installed. Inserts for all remaining interface parts are also installed. This kit contains all the remaining parts and hardware you need to get your factory-built splitboard on the hill. Climbing skins sold separately. NOTE: This kit includes Voile Slider Tracks and related hardware. With the Slider Tracks, you can mount your traditional snowboard bindings on your splitboard.
Voile Dual Height Climbing Heels - Add more versatility to your splitboard with the Splitboard Dual Height Climbing Heels from Voile. This kit includes a pair of dual-height climbing heels/wires, along with screws for attachment. Includes one pair of heels/wires and screws to mount to the inserts of factory-built Voile Splitboard only.
Voile Slider Pin - The Voile Slider Pin. Secures the Voile Slider Track to the splitboard in tour and ride modes. The stainless steel cable lanyard is attached to your binding to prevent the pin from being lost in the backcountry. Carry a spare!.
Voile Climbing Heel Pads - Factory Boards - Voile Splitboard Climbing Heel Pads for factory-built splitboards. The Heel Pads hold the Voile Climbing Wires and allow them to pivot between vertical and horizontal positions. The heel pad shims interface with Voile SD Crampons and also help protect the board topsheet from wear resulting from the pivoting climbing wires..
Voile Puck Alignment Guide - The Voile Splitboard Puck Alignment Guide. This guide keeps your Voile Universal Pucks properly aligned when mounting, making it much easier to mount the pucks in your desired stance angles and ensuring your factory-built splitboard bindings or Voile Slider Tracks will slide smoothly over the pucks..
Voile Scraper - The Splitboard Scraper from Voile. Handy for removing snow and ice during tour/ride transitions..
Voile Double Slot Disc - The Universal Double Slot Disc from Voile..
Voile Touring Riser - Increase your uphill touring rotation and enhance your edging ability while side-hilling with the Voile Splitboard Touring Riser. The 10mm riser increases the rotational angle of your binding and prevents your boot toe from hitting the deck of your board, allowing you to get up the hill a lot easier. 10mm riserIncreases the rotational angle of binding and prevents the boot toe from hitting the deck of the boardGives more leverage and boot/binding angulation to enhance edging ability on steep sidehills.
Voile Tip Clips - Voile Tip Clips. One pair of tough nylon tip-clips and all rivets and bushings to repair or replace old worn-out or broken tip-clips..
Voile Slider Track Gaskets - The Slider Track gasket from Voile is sandwiched between your binding and the aluminum slider track. This will add dampening to the ride and also help take up any extra binding screw length and prevent that extra screw length from protruding past the T-nut and further preventing the Slider Track from easily sliding on Universal Puck system..
Voile Slider Track T-Nuts - Slider Track T-nuts from Voile for mounting your snowboard bindings to the Slider Tracks. The 6mm diameter is industry standard for snowboard binding screws. They should work with your normal snowboard binding screws. Be aware of the screw length. If the screw is too long it will prevent the Slider Track from sliding onto the Universal Puck system. Insert washers under the screw heads as needed to provide sufficient clearance..
Voile Touring Brackets - Factory Boards - The Splitboard Touring Brackets - Factory Boards from Voile. Voile Splitboard Touring Brackets for factory-built splitboards, NOT for DIY saw-your-own-split-boards. This is Stainless steel bracket where the Slider Track attaches during the tour mode. Attached with stainless steel Slider Pin. Touring Bracket includes the plastic pin guide and all screws necessary to mount. For Factory Splitboards Only..
Voile Universal Puck - The Splitboard Universal Puck from Voile. Use with Universal Discs to dial in stance width and angles on a factory-built splitboard. Can be used for regular or goofy mounting. 4 per board required. Sold individually..
