Travel > Car Rack Accessories

This fairing for Yakima car racks reduces wind noise and increases fuel efficiency on those trips to the slopes or mountian bike trails. Oh, the power of aerodynamics... I knew those years in engineering school weren't wasted! These fairings are a great way to keep your car looking sleek, even...

IT’S NEVER GOOD WHEN YOUR SURFBOARD FLOATS AWAY. ESPECIALLY ON THE HIGHWAY AT 60 MPH. - Carry up to two surfboards with each pair of StrapThangs - Compatible with board bags - Not recommended for bungee jumping off of picnic tables. So let’s put an end to that right now,...

Fairing for Yakima car racks reduces wind noise and increases fuel efficiency by making your rack more aerodynamic—great place for stickers, too! 32" fairing fits vehicles similar in size to Subaru Outback Wagon and Toyota Sienna Tool-free installation; integrated snaparounds make installation onto round bars a breeze Protective bumpers won't...

There's a reason that Yakima calls them "Universal" MightyMounts. These little marvels let you fit just about any Yakima accessory to your factory roof rack bars. A set of them is mighty nice to have. Soft, grippy Dynaflex™ pads protect your crossbars and hold the Mighty Mounts firmly in place....

Wrench used for attachment of certain Yakima racks and accessories Wrench size accepts a bolt head Please consult the Yakima Rack Finder to match the correct Yakima parts with your vehicle

These 1"-diameter round crossbars are a main component of Yakima car top multi-sport rack systems. The bars span your vehicle's roof between Yakima Towers, providing a base on which different gear mounts can be attached Round shape makes it easy to install and remove gear mounts Fits Yakima's Q Towers,...

The back bone of any roof rack system is its CrossBars. Yakima's round bars are extremely strong and always give you an even attachment surface. Yakima's CrossBars are made from vinyl coated galvanized steel, ensuring strength and longevity. Yakima's round bars are also about 15% stronger than rectangular bars, making...

These "Same Key System" lock cores allow you to use just 1 key to lock/unlock all your Yakima car rack system components. Fits in all current locking Yakima components and accessories

This Yakima car rack replacement part is a cap head used on the old Kayak Stacker, TLC Kayak Saddles and ForkBlocks. Yakima part # 8880010

Nine different base options let you fit Control Towers to factory racks or permanently install on virtualy any vehicle. Custom Landing Pads work with the Control Towers to fit a broad range of factory tracks and other applications Includes a snap-on cover when not in use Each pad sold in...

The Yakima Loadstop is an accessory for all roof racks that prevents loads shifting from side to side. The LoadStop carries ladders, lumber, canoes, and such with 4 sturdy L-shaped brackets (included). It safely holds loads by preventing lateral shifts with a grippy, ribbed surface. Great for holding thicker, taller...

This Yakima car rack replacement part is a cap head used on most Yakima accessories. Yakima part # 8880012

Uses quick installation hardware to store your box or cargo basket on the wall, not in the corner with a bunch of dust bunnies. Integrates with the Quick Installation Hardware of Yakima Cargo Boxes

This car rack replacement part is a cap head used on Yakima Ski Mounts, Wheel Fork and Fairing. Yakima part # 8880011

The Fork Adaptors by Yakima are designed with three different sizes to fit whatever size axel fork you have on your bike. Constructed to fit all fork bike mounts including Yakima, Thule, Rocky Mounts, etc. With the 20mm you get a 20mm x 110mm axel/tube width fit. For freeride bikes...

This world is not always kind. Protect yourself from misfortune with Yakima's 9ft SKS Cable. An easy and effective way to discourage your stuff from wandering off. Dimensions: 9ft. Long Weight: 1.6 lbs. Locking: SKS compatible Attachment: Anything it'll go around

Pad your crossbars with Yakima CrossBar Pads to keep your boat and other cargo from resting directly on the bars. These 20" wide pads are soft yet durable, with a nylon shell to protect the inner foam from abrasion andexposure.20" wide, protect a wide area of the bar. Nylon covers...

Have Bikes, Kayaks, and Skis; Will Travel. What you need is Yakima's Q Towers; an innovative way of securing all your toys to your vehicle. Q Towers, combined with the appropriate Q Clip will fit most vehicles, are easy to put on and are super secure. Die-cast interior gives you...

Masters degree in versatility, PhD in fit and only a first grade reading level required for installation! Custom fit for vehicles with or without rain gutters Ball-and-socket mechanism allows the rack to self-adjust to any roof/door geometry Quick-cam makes installation a snap Strong, stainless-steel clips fit tight doors Requires Yakima...

These "Same Key System" lock cores allow you to use just 1 key to lock/unlock all your Yakima car rack system components. Fits in all current locking Yakima components and accessories

These "Same Key System" lock cores allow you to use just 1 key to lock/unlock all your Yakima car rack system components. Fits in all current locking Yakima components and accessories

SKS stands for Same Key System. These lock cores allow you to use just 1 key to lock/unlock all your Yakima car rack system components for instant security. Fits all current lockable Yakima components and accessories. Package of 2, 4 or 6

Thanks to the invention of the Universal SnapAround, the days of all-or-nothing are over--this adapter fits both round and square cross bars. Quick conversion from round to square bar by pulling out tabs Grips round bar even better than the original SnapAround

WHETHER YOU FIND THE WHISTLING WIND SCRAY, CREEPY, OR JUST PLAIN ANNOYING, YOU CAN GAG IT WITH ONE OF THESE. - Snaps on front crossbar in seconds - Creates smooth flow of air to reduce wind noise - Product # 01115 Q: How many do I need? A: One placed...

These "Same Key System" lock cores allow you to use just 1 key to lock/unlock all your Yakima car rack system components. Fits in all current locking Yakima components and accessories