Kayaks & Boating > Bilge Pumps

More Power! That's the number one request Attwood receives from boat builders, dealers and boaters alike. The Tsunami series is our answer. Three high-performance bilge pumps that mover water at output capacities of 500 GPH, 800 GPH and 1200 GPH. With their innovative engineering and compact design, tsunami pumps deliver...

The handy Water-Buster Portable Pump gives you compact and cordless pumping flexibility at up to 200 gallons per hour. Great for pumping out bilges, water tanks, skiffs, and runabouts. Runs for up to 5 hours on 3 D sized alkaline batteries. The completely submersible pump is ready for any situation....

The BilgeKleen system utilizes patented MYCELX chemistry to provide total protection in the bilge. The system includes a patented MYCELX filter, a filter housing and a Smartpad. The specially designed MYCELX filter removes oil, gas, diesel fuel and other hydrocarbons from the bilge water as it is discharged overboard, while...

Totally sealed No moving parts Not affected by oils or debris Completely corrosion proof "Mirus" field effect technology Activates at 2" fluid level De-activates at 3/4" fluid level No mercury No false starts 20 Amp maximum 12/24 volt Ignition protected Meets and exceeds NMMA, ABYC, .SCG, ISO 8846 3-year warranty...

Engineered to commercial standards, the Rule 5-Year Gold Series is supported with an exclusive 5-Year warranty. The pump features a Rule manufactures double insulated long stack motor for superior quality and performance. Features a 5/16" stainless steel shaft, an extra strong nylon/fiberglass impeller, a heat resistant acetal resin housing and...

Rule's completely submersible, fully automatic bilge pumps eliminate the need for external float switches. These pumps turn on every 2-1/2 minutes for about one second to sense for water; if water is present the pump will run until all water is removed, then it will return to the sensing mode....

Engineered to commercial standards, the Rule 5-Year Gold Series is supported with an exclusive 5-Year warranty. The pump features a Rule manufactures double insulated long stack motor for superior quality and performance. Features a 5/16" stainless steel shaft, an extra strong nylon/fiberglass impeller, a heat resistant acetal resin housing and...

Rule's 3-Way Panel Switches offer a means to achieve that extra bit of control over any bilge pump with an automatic float switch. Toggles have three positions (automatic, off, or manual). Black stainless steel panel.

Rule's 3-Way Panel Switches offer a means to achieve that extra bit of control over any bilge pump with an automatic float switch. Toggles have three positions (automatic, off, or manual). Black stainless steel panel.

Rule Rule-Mate Series Fully Automatic Pumps contain the pump and the non-mercury float switch in a single, compact housing. As the water level rises, so does the float switch, activating the pump when the water level reaches 2-1/8''. There is no on/off cycling and therefore, no power use until the...

Rule's completely submersible, non-automatic bilge pumps offer good performance at a value price. Designed to be installed in conjunction with a float switch or panel switch, these pumps feature easy clean snap-lock strainer bases, silent, vibrationless operation, anti-airlock protection, stainless steel shafts, and no burn-out when run dry. 12VDC.

Rule's completely submersible, non-automatic bilge pumps offer good performance at a value price. Designed to be installed in conjunction with a float switch or panel switch, these pumps feature easy clean snap-lock strainer bases, silent, vibrationless operation, anti-airlock protection, stainless steel shafts, and no burn-out when run dry. 12VDC.

Rule's completely submersible, fully-automatic bilge pumps eliminate the need for external float switches. These pumps turn on every 2-1/2 minutes for about one second to sense for water; if water is present the pump will run until all water is removed, then it will return to the sensing mode. Features...

Rule's completely submersible, fully-automatic bilge pumps eliminate the need for external float switches. These pumps turn on every 2-1/2 minutes for about one second to sense for water; if water is present the pump will run until all water is removed, then it will return to the sensing mode. Features...

Permits small Rule bilge pumps to be side mounted to a vertical stringer, a bulkhead or a transom. Use this bracket when bottom mounting in inconvenient or "impossible" places. Simply remove the strainer from pump, put the bracket in place and reassemble.

Optional Side/Vertical Mount Strainer Base for Rule Mate Pumps.

Designed to be used with Rule Pumps. Heavy Duty molded, non-corrosive, high impact plastic.

Original replacement strainer bases for your Rule Bilge Pump.

Original replacement strainer bases for your Rule Bilge Pump. For Rule Mate pumps.

Original replacement strainer bases for your Rule Bilge Pump. For square Rule Bilge pumps.

The Rule-Mate Series of fully automated bilge pumps contain the pump and the non-mercury float switch in a single, compact housing. As the water level rises, so does the float switch, activating the pump when the water level reaches 2-1/8''. There is no on/off cycling and therefore, no power use...

Extra measure of protection for use on round base rule pumps up to 3700 GPH. Installs directly into existing strainer. Filters out excess debris and helps prevent jamming and failure.

The Whale Gusher Urchin is the ideal manual bilge and waste water pump for small to medium sized boats. The compact design is perfect for confined spaces, and the smooth, easy action pumps up to 11 gallons per minute. The lightweight and durable housing has feet for convenient mounting to...

In-Line Check Valves are perfect for preventing back-flow through hoses and for maintaining prime in a suction or discharge line. Available in two models, the larger one fits both 1'' and 1-1/2'' hose, and the smaller version fits 3/4'' hose. Suitable for use with manual or electric pumps.