Kayaks & Boating > Boating & Marine Accessories

3M Marine Fiberglass Cleaner and Wax

This 3M(r) Marine fiberglass cleaner and wax is designed to remove light to medium UM oxidation, clean, polish and protect fiberglass/gelcoat and marine topside paints. The unique light formulation combines a compound with a special blend of waxes that restore shine and protect in one application. 16 fl oz Light...

3M Marine Fiberglass Restorer and Wax

This 3M(r) One Step fiberglass wax features high-performance polyurethane that becomes tack free in one hour and fully cures in approximately 24 hours. The seal is extremely strong and designed to retain its strength above or below the water line. It also stays flexible to allow for structural movement, with...

3M Protective Liquid Wax

This 3M(r) Marine Protective Liquid Wax utilizes reactive chemistry and actually bonds to a boat's surface to provide a durable protective surface. It provides a high gloss and is designed to protect fiberglass/gelcoat, marine topside paints, painted aluminum, and marine metal parts. Model Number: 09026Q6 oz Provides a high gloss...

3M Ultra Performance Paste Wax

3M Marine Ultra Performance Paste WaxÆs unique polymer technology provides the durability of an acrylic with the soil release and water beading properties of a fluoropolymer and silicone, making it the most advanced product of its kind. It will leave a protective high gloss finish on marine fiberglass gelcoat, marine...

3M White Sealant Adhesive - 3oz Tube

This 3M(r) Fast Cure 05203 Adhesive/Sealant is designed to effectively absorb the stress caused by shock, vibration, swelling, or shrinking. It can be used for bonding and sealing jobs including fiberglass deck to fiberglass hull, wood to fiberglass, portholes and deck fittings, motors on fiberglass transoms, under mouldings, hull seams...

The Airhead(r) bungee dock line is designed to help absorb shock to boats, cleats, docks, pylons, and other hardware. A bungee cord is hidden inside the rope and acts as a built-in snubber. The 2 foam floats protect the boat from chafing, and there's a sliding adjustment at both ends...

The AFI(r) mini compact electric horn combines high-quality design with a powerful tone. It mounts almost anywhere and is a totally sealed sound unit with a stainless-steel cover, diaphragm and bracket. Mounts almost anywhere Totally sealed sound unit Stainless-steel cover, diaphragm and bracket Vibration dampening pad includedQ2-volt, prewired Size: L...

This Anderson Marine Division(r) submersible identification barlight is designed for over 80-in applications. It features three, 150 sealed lights on an ABS plastic bar. It comes with a complete wire harness. Submersible identification barlight for over 80-in applications Three, 150 sealed lights on an ABS plastic bar Complete wire harness...

This Anderson Marine Division(r) combination light is an under 80-in submersible tail light with gasketed lenses to provide a seal to prevent water from entering lamp body. These lights exceed DOT requirements for stop, turn signal, tail, rear and side reflector, side marker lights, and license plate lights. Under 80-in...

The Anderson Marine Division(r) submersible tail light is a "Belljar" submersible with gasketed lenses to provide a seal that prevents water from entering the lamp. The kit includes left and right tail lights, two 108WA marker lights, a license bracket, a 20-ft split harness, mounting hardware, and instructions. "Belljar" submersible...

This Anderson Marine Division(r) tail light offers 7 functions including stop, turn signal, tail, rear and side reflector, side marker light, and license plate light. It bolts on 2-in centers and includes mounting hardware. An under 80-in tail light Functions include stop, turn signal, tail, rear and side reflector, side...

This Anderson Marine Division(r) trailer light kit provides all lighting and reflective equipment for trailers less than 80-in wide. IIt features tough molded housings and phosphorous bronze electrical contacts. The front side marker lights have built-in reflectors and mount with a single stud. The kit includes a 20-ft, 4-wire split...

This plastic tank repair kit is designed for use with ABS, polyethylene, fiberglass, and metal water and holding tanks. Resin and curing agents are mixed in pack Complete with 2-in x 15-in fiberglass tape Cures in about 20 minutes

The Attwood(r) automatic float switch is designed to convert any bilge pump that draws 12 amps (at 12 VDC) or 6 amps (at 24 VDC) or less to fully automatic operation. It features a compact, low-profile design that mounts on any surface from horizontal up to a 24-degree angle. It...

This Attwood(r) bilge pump pumps bilge water level down to 3/8 in. Base and mounting bracket have molded-in mounting holes for #8 screws. It offers 450 gallons-per-hr output at open flow and 310 gallons-per-hr output at 3-ft head. For 3/4-in I.D. hoseQ2-volt DC systems only Pumps bilge water level down...

This Attwood(r) bilge pump pumps bilge water level down to 3/8 in. Base and mounting bracket have molded-in mounting holes for #8 screws. Despite its compact size it offers 630 gallons-per-hr output at open flow and 450 gallons-per-hr output at 3-ft head. For 3/4-in I.D. hoseQ2-volt DC systems only Pumps...

The Attwood(r) 750 GPH bilge pump is a powerful pump with a 3/4-in outlet. It delivers true 750 GPH at open flow and 550 GPH at a 3.3-ft head while drawing less than 3 amps. Model Number: 4207-7 Dimensions: H 4 3/32 in; L 4 13/32 in; W 3 29/32...

These Attwood(r) clamp-on oarlocks with 1/2-in x 2-in shanks are construction with zinc-plated steel to resist rust. They fasten securely to the oar with 1 adjustable bolt and no drilling required. Model Number: 9146-3Q pairQ/2-in x 2-in shank Zinc-plated steel Rust resistantQ adjustable bolt

The Attwood(r) Pro-Series rod holder incorporates a cam-lock adjustment release that you simply flip down, without removing the holder from the mount, for adjustments up to 160-degrees vertically and 360-degrees horizontally for the perfect rod tip position. The offset rod throat keeps the rod free of the neck and and...

This Attwood(r) rear view ski mirroris constructed with a shatterproof 180-in convex lens to eliminate blind spots. It adjusts to any position, any angle up or down or side to side, while the Perma-Lock adjusting knob holds it firm, so it can't vibrate out of position. The Universal mount allows...

The Atttwood(r) Sahara bilge pump include 36-in of 16-gauge tinned copper wire. The wire is caulked to prevent water from wicking through the insulation jacket. A permanent-magnet motor, stainless-steel shaft and steel-reinforced seal assure powerful, durable performance. Include 36-in of 16-gauge tinned copper wire Wire is caulked to prevent water...

These Attwood(r) turbo bilge blowers offer an inline design that provides powerful, reliable ventilation for engine compartments, bilges and heads. Turbo 3000 For 3-in I.D. ventilation hoseQ2-volt DC systems only Inline design Open-flow capacity 145 CFM at 13.6 volts; 135 CFM at 12 volts Draws 2.7 amps Mounting feet are...

Don't let a damaged skeg keep you off the water. The Blackfin is available in three sizes to fit most any engine Easy to Install - Can be done at home, saving you time and money Made from incredibly tough nylon composite that is stronger than steel Applied with shock...

This Boat Buckle winch strap with a loop end is constructed with a 8,000-lb, steel-forged snap hook and a stainless-steel spring. Strong steel snap hook Breaking strength of 3,500 lbs, straight pull 8,000-lb, steel-forged snap hook with stainless-steel spring

This Camco(r) wheels dock stabilizes the trailer tongue and keeps the wheel from sinking into soft ground. It includes a rode for easy handling. Stabilizes trailer tongue Rope included for easy handling