Kayaks & Boating > Downriggers & Outriggers

Comes with 27'' of 200lb. test black mono, Goldfinger Release Clip, heavy duty locking snap swivel, and stainless steel thimble.

Comes with 100 feet of the Lo-Vis 100 lb. test Mono, special mini-double crimp, Goldfinger Release Clip, and heavy duty locking snap swivel.

Does the work of 3 kites! Waterproof, durable Ripstop nylon sailcloth flies in rain and after being dunked in saltwater. Interchangeable 1-piece spars adapt to all wind conditions from 4 to 20-plus miles per hour. Dacron bridle adjusts for wind and flight. Will not mildew. Kit includes a set of...

Specially stranded T304 Stainless Steel 1x7 wire provides the flexibility and resistance to bending fatigue required for use on downriggers. Includes a stainless steel thimble and a 225 lb. (102.3 kg) stainless steel coast lock snap swivel. Surfstrand? Downrigger Wire is ideal for fresh and saltwater use and is designed...

The Sportsman Electric Downrigger 2 ft. aluminum J-rod Powerful 12 volt sealed motor w/ adjustable disc clutch 4 in. x 4 in. mounting plate w/ four hold down knobs Bright, protective anodized finish Single aluminum rod holder Footage counter 200 ft. of stainless steel cable Line release included

2, 3 & 4 ft. sectional,"tip-up" boom Adjustable disc clutch 4 in. x 4 in. mounting plate w/ four hold down knobs Bright, protective anodized finish Single Multi-Set rod holder Footage counter 200 ft. of stainless steel cable Line release included

The Gadabout w/ Slim-Line Base 2 ft. aluminum J-rod Adjustable disc clutch 2.5 in. x 3 in. mounting base Bright, protective anodized finish Single aluminum rod holder Footage counter 150 ft. of stainless steel cable Line release included

The Otter Boat A revolutionary new planer that out performs old fashion boards Handles rough water well and won't stall in turns

The Otter Release An all-purpose release that can be used on in-line planers, planer rigger systems or adapted for downrigging

Designed for electric downriggers Constructed of thick wall aluminum and machined solid aluminum base Adjusts to 9 positive locking positions with just one hand Bright, protective anodized finish Protective vinyl caps prevent wear to rod handles

Swivel Mounting Base Rotates 360 degree Locks in 8 positions Accepts all Big Jon 4 in. x 4 in. bases Protective hard anodized finish

The Silver Triple Multi-Set Rod Holders On Pedestal Base Three Multi-Set rod holders on 2 in. tall pedestal base Constructed of thick wall aluminum and machined solid aluminum base Adjusts to 9 positive locking positions with just one hand Bright, protective anodized finish Protective vinyl caps to prevent wear to...

Keep your Cannon downrigger out of the weather between fishing trips. Fits any Cannon downrigger with single or double rodholders. Black with white Cannon logo.

This solid aluminum deckplate is drilled and tapped to specifically fit Cannon swivel and standard downrigger bases. Measures 6'' x 5'' x 1/2''.

Simply slide this gimbal mount into a recessed rodholder. Once in place, it's ready to accept your downrigger. No holes to drill or boat alterations. Easily stowed away by lifting it out of the rodholder.

Heavy-duty Lexan and stainless steel swivel base. Six point locking includes two 45 degree positions. Measures 5'' x 5'' x 1 1/8''. Includes four 1/4-20 x 1'' truss head screws. Fits all Cannon downriggers.

Works on any brand of downrigger. This kit includes six crimpless snap-on terminators and six cushion tops.

Truly universal because it can cover so many different tension settings. Two adjustment points allow tension settings from 2 to 22 pounds. Perfect for slow trolling with live baits or going after light hitting walleyes. It's tough enough to handle heavy saltwater plugs.

Plane-R-Boards's new design and construction make it one of the best tracking boards on the market. Great for rough water. Bright orange color for high visibility. Permanently buoyant - will not dive. Lets you run multiple line sets and vary the distance and the depth. High-impact material won't mar or...

Designed for fishing two rods off the same downrigger. The post fits into the standard tube clamp that comes with most Cannon downriggers. The angle of each holder can be adjusted separately. All parts are made of lightweight, corrosion-resistant materials.

Simply slide the mount's gimbal tube into your boat's recessed holder. Once in place, you have a base ready to accept your downrigger. No holes to drill or changes to make on your boat. Removes easily by pulling up and out of rod holder.

Make sure you hang on to your downriggers! This lock will keep them from wandering off. When locked, the shaft is hidden inside the downrigger body, so it can't be sawn off. Fits Digi-Troll and Magnum 10A downriggers.

New High speed 250 feet-per-minute lift motor with 20lb. Weight capacity. Large frame design includes heavy-duty boom 24"-53" telescopic. Short-stop feature stops weight at the water surface. Positive Ion Control. Ball storage hook prevents weight damage to boat. 250 ft. of 150lb test 316 grade stainless steel cable. Includes line...

The Cannon Mag 10TS Electric Downrigger offers high speed 250-feet per minute retrieval rate with 20lb. weight capacity. White cosmetics and a stainless steel spool that allows you to use monofilament or "super lines". Adjustable positive ion control regulates the electrical field. Short-stop feature automatically stops weight at water line....

Built in electronics allow downrigger functions to be controlled from any Hummingbird 900, 700, or Matrix series fishing system (requires optional CannonLink module). CannonLink module gives you the ability to cycle downriggers up and down, bottom track, raise and lower, monitor speed & temp (requires optional Cannon Speed-n-Temp sensor), and...