The AKG C 562 CM flush-mount boundary microphone uses the same transducer as the C 562 BL. The C 562 CM has been designed specifically for permanent, "invisible" mounting in ceilings, walls, tables, stage props, etc. Owing to its high sensitivity, the C 562 CM is a perfect tool for surveillance or live recording since a single microphone can cover an entire room.
The supplied XLR phantom power adapter connects to the microphone cable through a miniature connector so installation holes can be smaller than the diameter of the phantom power adapter.
|Cable:||0.5 m (20 in.)|
|Current consumption:||<2 mA|
|Equivalent noise level:||16 dB-A|
|Finish:||Matte nickel plated|
|Frequency range:||20 to 20,000 Hz|
|Max. SPL:||130 dB (k=1 %)|
|Polar pattern:||Omnidirectional (hemispherical)|
|Recommended load impedance:||>2000 ohms|
|Sensitivity:||25 mV/Pa (-32 dBV)|
|Signal/noise ratio (A-weighted):||78 dB|
|Supply voltage:||9 to 52 V phantom power to DIN/IEC|
|Warranty:||AKG Acoustics 2 year parts & labor warranty|
|Weight:||30 g (1.1 oz.)|