Alto Empire 8-Channel Powered Mixer with 2-Way 12" Passive Loudspeaker 9-Band Master Graphic EQ 2 x 350W Power

Priced: $499.00
Visit our Daily Deals for great products at low prices.
Alto Empire 8-Channel Powered Mixer with 2-Way 12" Passive Loudspeaker 9-Band Master Graphic EQ 2 x 350W Power -

The Alto Empire 8-Channel Powered Mixer is loaded with a total of 14 inputs: 4 XLR jacks with selectable phantom power, 8 line jacks and a stereo RCA pair. Connect any combination of mics, instruments and guitars - whatever. Each channel is equipped with its own 3-band EQ, plus there's a master 9-band stereo EQ. Onboard Alesis-powered effects provide 100 ready-to-use presets. Thoughtful extras include stereo send and return jacks and a headphone jack. Weighing in at just under 11 pounds, this fan-cooled powerhouse provides two clean channels, each pumping out 180 Watts ( at 8 Ohms/2 x 350 W at 4 Ohms) of continuous music power.
Each of the two SX112 cabinets is built to deliver superior sound, night after night. The steel grille protects the drivers and horns from the perils of repeated stage use. Recessed handles make the SX112 easy and safe to move and heavy-duty rubber feet keep it place once you're there. The trapezoidal design greatly decreases standing waves in the cabinet, delivering true and exact sound reproduction. Inside, the SX112 is home to a high-performance 12" LF driver (2" voice coil) and an exacting 1" neodymium HF driver.

Lining and Layers:

  • 4 XLR jacks with phantom power, 8 line jacks and stereo RCA


  • Rugged black textured finish and full-length steel grille


  • 3-band EQ on each channel; 9-band master graphic EQ


  • On-board Alesis digital effects processor with footswitch bypass
  • Lightweight, trapezoidal cabinet with recessed handles
  • Two parallel Speakon NL4 jacks for input and through connections
  • 8 input channels; 14 total inputs including
  • 12" low-frequency transducer
  • 400 Watts program / 200 Watts continuous
  • 1" neodymium high-frequency driver
  • Stereo aux send and return jacks
  • Continuous 2 x 180 W at 8 Ohms (2 x 350 Watts at 4 Ohms) with thermal, short and voltage protections
Want it cheaper? Set your own price.
Enter the price you want to pay and we'll email or text you if we find a store that will sell it for that amount:
Price: $
Your email:
Cell number: (optional, for text message)
Learn how offers work...
A/D and D/A Converters:24-bit
All Other Input:10 kOhms or Greater
All Other Outputs:120 Ohms
Controls:100-position preset selector Clip LED Mute Switch Foot Switch with LED indicator
Crosstalk Adjacent Input:= -80 dB at 1KHz (CH1-6)
DSP Resolution:24-bit
Dimensions(WxLxH):304.5x256x74.5mm / 11.98x10.07x2.93"
Distortion:(THD&N) = 0.005% At + 4 dBu, 1 kHz
Distortion (at 1 KHz):<0.05%
Distortion (at 100 W & 1 kHz):<0.15%
Electric: Frequency Response:20 Hz - 20 kHz
Frequency Response:20 Hz to 22 kHz, +/-1 dB
Frequency Response (at 100 W):20 Hz to 22 kHz, +/-2 dBu
Gain range:0 dB to 50 dB (Mic)
Impedance Microphone Input:3.9 kOhms
Input Channels: Mono channels:Ch 1 - Ch 4
Input to Output:= -75 dB at 1KHz (Stereo L/R,Ch.1-4, Pan: panned hard left or right)
Line Input: Distortion:(THD&N) = 0.005% at +4 dBu, 1 kHz
Line Input: Electronically Balanced:SW to LINE
Line Input: Frequency Response:20 Hz to 22 kHz, +/-1 dB
Line Input: Gain range:15 dBu to 35 dBu
Line Input: Maximum Voltage Gain:20 dB FX Return - Main Mix Out 20 dB RCA Tape Input - Main Mix Out
Line Input: SNR (Signal-to-Noise Rate ):=110 dBu
Line Input: Stereo channels:Ch 5 - Ch 8
Main EQ (Option):+/-12dB at 9 bands (63,125, 250,500, 1 k, 2 k, 4 k, 8 k,16 kHz)
Main Mix Section:Tape, Aux, Phones output level 0 dBu Unbalanced, 1/4" jacks
Max out:+22 dBu Unbalanced, 1/4" Jacks
Maximum Voltage Gain:70 dB Ch. Mic input - Main Mix Out & Tape Out 80 dB Ch. Mic input - Control Room & Phones 60 dB Ch. Mic input - Aux Send
Microphone Input:Electronically Balanced, discrete input configuration
Mono channels:High ±15 dB at 12 kHz Mid ±15 dB at 2.5 kHz Low ±15 dB at 80 Hz
Noise (Bus noise):= -90 dB at 20 Hz - 22 kHz (channel & Main level at 0 dB,other at minimum, DSP mute)
Output level:0 dB
Phantom power (Mic Pin2/Pin3 And Pin1):+45 V - +49 V with switch control
Power Consumption:No Output power state at 230 V = 32 W 100 VAC - 50/60 Hz
Power continuous:1KHz, THD 1% " 2 X 350 W at 4 Ohms or 2 X 180 W at 8 Ohms Power EIAJ 1KHz, THD 1% 2 X 400 W at 4 Ohms or 2 X 200 W at 8 Ohms
Power supply Main voltage:110-120 VAC-60 Hz 220 - 240 VAC - 50 Hz 100 V: T12 A 250 V 110 - 120 V: T12 A 250 V 220 - 240 V: T6.3 A 250 V
S/N Ratio:> 90 dB
SNR (Line In):= 100 dBu
SNR (Signal to Noise Ratio):= 110 dBu
SPK. Out Distortion (at 1 W & 1 kHz):<0.1%
Stereo Graphic EQ:±12 dB at 16 kHz ±12 dB at 8 kHz ±12 dB at 4 kHz ±12 dB at 2 kHz ±12 dB at 1 kHz ±12 dB at 500 Hz ±12 dB at 250 Hz ±12 dB at 125 Hz ±12 dB at 63 Hz
Stereo channels:High ±15 dB at 12 kHz Mid ±15 dB at 2.5 kHz Low ±15 dB at 80 Hz
Tape Out:1 kOhms
Type of effects:Echo, Echo + Verb, Tremolo, Plate, Chorus, Vocal, Rotary, Small Room, Flange Verb, Large Hall
Weight:4.8kg / 10.58lbs

Related Categories:

  • Everything from Alto.

Alto Empire 8-Channel Powered Mixer with 2-Way 12" Passive Loudspeaker 9-Band Master Graphic EQ 2 x 350W Power Review:

No reviews are available for this product.