The Anchor Audio EXP-7500U2 Explorer Pro is a portable public address system ideal for schools, corporate trainers and places of worship. The 2-way speaker is powered by 75 W of power to produce up to 110 dB of clear, intelligible sound. The rear panel features bass and treble tone controls and 3 pull-type volume controls for the full complement of input and output connectors. These include a pair of XLR microphone inputs, both 1/4" and RCA lines in and out and a 2 ohm speaker out that connects to the passive satellite.
The EXP-7500U2 offers an unusually flexible set of powering options, which include an internal battery and charger with an accompanying pair of LED indicators, AC power with a multi-voltage power supply and a 12 V DC power in - the system may be operated from the power port of an automobile. For extra protection, the amplifier and speakers are protected from thermal overload and short circuit.
The Anchor Audio EXP-7501 is a 2-way, high-output passive satellite speaker, made for use with the Explorer Pro portable PA system. The ported, durable, molded polypropylene enclosure houses a 6.5" woven fabric woofer and a high-output, horn-loaded tweeter.
The Anchor HBM-60 is a lightweight headband microphone designed for hands-free operation. The microphone features a cardioid polar pattern, which is effective in minimizing noise at the off-axis sections of the microphone. The cardioid pattern provides high gain before feedback making it suitable for use near monitor speakers. The microphone is fixed to a flexible boom for easy positioning and optimum pickup. The cable is terminated with a Switchcraft TA4F 4-pin mini XLR plug, compatible with Anchor wireless body pack transmitters.
The LM-60 Cardioid, Electret Lavalier Microphone, with a 4-pin mini XLR female connector, is made for use with the Anchor Audio WB6000 beltpack transmitter.
The Anchor Audio SS-550 is a Heavy-Duty Speaker Stand for use with Explorer and Xtreme Sound Systems.
|Dimensions (H x W x D):||EXP-7501 Speaker: 16.5 x 10.5 x 10" (420 x 270 x 250mm) EXP-7500U2 Speaker: 16.5 x 10.5 x 10" (420 x 270 x 250mm)|
|EXP-7500U2 Speaker:||Dual internal wireless receivers are designed for use with Anchor wireless microphones|
|EXP-7500U2 Speaker: AC Power:||90 - 264VAC, 50/60Hz|
|EXP-7500U2 Speaker: Battery Type:||Built-In rechargeable battery and charger|
|EXP-7500U2 Speaker: Frequency Response:||80Hz - 16kHz|
|EXP-7500U2 Speaker: Inputs:||2 x XLR Female Balanced Microphone 2 x L, R RCA Phono Unbalanced Line 1 x 1/4" TS Phone Unbalanced Line 1 x 12 VDC In|
|EXP-7500U2 Speaker: Microphone Type:||No|
|EXP-7500U2 Speaker: Output:||1 x 1/4" Phone Companion Speaker Out(2 Ohm) 2 x L, R RCA Phono Unbalanced Line 1 x 1/4" TRS Phone Balanced Line|
|EXP-7500U2 Speaker: Power Output:||75W|
|EXP-7500U2 Speaker: SPL:||110dB @ 1m|
|EXP-7500U2 Speaker: Speakers:||6.5" Woven Fiber Woofer Horn Tweeter|
|EXP-7500U2 Speaker: Wireless Receiver:||UHF x 2|
|EXP-7501 Speaker:||Rugged, high-quality 4-pole Neutrik Speakon connector|
|EXP-7501 Speaker: Connectors:||1 x Speakon|
|EXP-7501 Speaker: Controls & Indicators:||No|
|EXP-7501 Speaker: Frequency Range:||80 Hz - 16 kHz|
|EXP-7501 Speaker: High Frequency Driver:||1" Horn-loaded tweeter|
|EXP-7501 Speaker: Impedance:||8 Ohms|
|EXP-7501 Speaker: Low Frequency Driver:||6.5" woven fiber woofer|
|EXP-7501 Speaker: Maximum Power Handling:||60 Watts|
|EXP-7501 Speaker: Maximum Sound:||110dB @ 1m Pressure Level (SPL)|
|EXP-7501 Speaker: Mid Frequency Driver:||No|
|EXP-7501 Speaker: Shielded:||No|
|Flexible Boom of Headband Mic:||The microphone is stationed on a flexible boom for easy positioning and optimum pickup|
|Headband Mic: Cable:||36" / 91.44 cm|
|Headband Mic: Dynamic Range (Typical):||Sensitivity: -48dB @ 1kHz|
|Headband Mic: Frequency Response:||30Hz to 15kHz|
|Headband Mic: Output Connectors:||TA4F (mini XLR female)|
|Headband Mic: Output Impedance:||Lo-Z|
|Headband Mic: Polar Pattern:||Uni-directional|
|Headband Mic: Power Requirements:||1-10 volts DC|
|Headband Mic: Transducer:||Electret condenser|
|TA4F Connection of Headband Mic:||The cable length measures 36" and terminates to a TA4F mini XLR connection, compatible with Anchor wireless transmitters|
|Weight:||EXP-7500U2 Speaker: 23 lbs (10.4kg) Headband Mic: 0.07 oz|
|Anchor Audio EDP-7500ACDUAL/HBM/HBM Explorer Pro AC/DC Deluxe Package with EXP-7501 Speaker Cable 2 x SS-550 Stand 2 x HBM-TA4F Headband Mic||$1,991.00|
|Anchor Audio EDP-7500ACDUAL/LM/LM Explorer Pro AC/DC Deluxe Package with EXP-7501 Speaker Cable 2 x SS-550 Stands 2 x LM-60 Lapel Mic with Bodypacks||$2,047.00|
|Anchor Audio EDP-7500ACDUAL/HH/HBM Explorer Pro AC/DC Deluxe Package with EXP-7501 Speaker Cable 2 x SS-550 Stand WH-6000 Handheld HBM-TA4F Headband Mic||$1,991.00|
|Anchor Audio EBP-7500ACDUAL/LM/HBM AC Powered Explorer Pro Basic Package with SS-550 Stand LM-60 Lapel Mic and HBM-TA4F Headband Mic with Bodypacks||$1,562.00|