The Anton Bauer ABP-248X Two DIONIC HCX Batteries & T2 Charger Kit combines two 124 watt-hour Gold Mount batteries and a two-position charger that can charge both batteries and additionally power a camera all simultaneously.
Each DIONIC can support a 10 amp draw and can run both a 40 watt camera and a 20 watt light for two hours at the same time. A motion detection feature has a "deep sleep" setting for maintaining battery life by reducing self-discharge. A RealTime LCD fuel gauge displays up to nine hours of run-time data (under low power load conditions). The data is displayed in seven segments with four arcs that indicate 15-minute time intervals.
The T2 charger has a feature called InterActive, which lets you see fuel gauge data displayed in a connected camera's viewfinder or LCD. The data is communicated to the camera via an Anton Bauer proprietary camera / battery communications protocol. The output for powering a camera is a 70 watt 16 VDC output. The T2 compatible with any Anton Bauer Logic Series battery.
|DIONIC HCX:||Fuel gauge displays up to nine hours of run-time data (under low power load conditions)|
|DIONIC HCX: Output voltage:||14.4 VDC|
|DIONIC HCX: Power:||Capacity: 120 Wh (Nominal 124 Wh; Typical 118 Wh) Li Ion battery Sustains a 10 amp draw Runs a 40W camera with a 20W light for up to 2 hours|
|Dimensions:||DIONIC HCX: 4x5.5x3" / 10.16x14x7.6cm T2: 9.2x3.2x8.5" / 23.36x8.2x21.6cm|
|T2:||Meets regulatory requirements including CE and FCC|
|T2: Battery Bays:||2|
|T2: Connections/Interface:||Gold Mount Type (x 2) 4-Pin XLR (x 1)|
|T2: Diagnostics:||Automatic Charge Termination Interactive Charge Program|
|T2: Power Requirements:||100 - 240 VAC, 50/60 Hz|
|T2: Type of Charging:||Simultaneous|
|Weight:||DIONIC HCX: 2.4 lbs / 1.1 kg T2: 2.9 lbs / 1.3 kg|