The Audio-Technica AT4022 Omnidirectional Condenser Microphone features a low-profile design and small-diaphragm condenser element. The sensitivity, frequency response and SPL capabilities make it a suitable choice for speaker cabinets, vocals, percussion instruments, drums and "spot" placement on guitars, stringed instruments, etc.
The omnidirectional polar pattern provides a wide pickup area and preserves the integrity of the signal. An 80Hz high-pass filter switch reduces low frequencies and all associated noise. In addition a -10dB Pad switch provides added headroom and minimizes distortion when capturing transient (peaking) audio signals.
|Dimensions (LxDiameter):||5.67x0.83" / 144x21.08mm|
|Dynamic Range (Typical):||133 dB, 1 kHz at Max SPL|
|Frequency Response:||20-20,000 Hz|
|Low Frequency Roll-Off:||80 Hz, 12 dB/octave|
|Maximum Input Sound Level:||146 dB SPL, 1 kHz at 1% T.H.D. 156 dB SPL, with 10 dB pad (nominal)|
|Noise:||13 dB SPL|
|Open Circuit Sensitivity:||-34 dB (19.9 mV) re 1V at 1 Pa|
|Output Connectors:||3-pin XLR|
|Output Impedance:||250 ohms|
|Power Requirements:||48V DC, 3.0 mA typical|
|Signal-to-Noise Ratio:||81 dB, 1 kHz at 1 Pa|
|Switches:||Flat, roll-off;10 dB pad|
|Transducer:||Fixed-charge back plate, permanently polarized condenser|
|Weight:||4.4oz / 124.74g|