• The APS 25b-RS2 battery powered speaker system is a fully self-contained wireless sound reinforcement system with two infrared wireless bodypack transmitters and HS-12 headset/mics.
• Incorporating a 20 watt amplifier, the APS 25b is a rugged, 2-way speaker with a 5.25" shielded woofer and a 1" wide-dispersion tweeter that produces clear detailed sound for all corporate, educational and commercial applications.
• The APS 25b includes a Master Volume control and Tone control to reduce feedback. Individual level controls for each of the four inputs- two wireless, one wired mic level, and one line level-giving you more ways to configure your system. The speaker's variable line level output lets you daisy chain multiple speakers. The high gain mic input shorts automatically to reduce noise when no mic is plugged in.
• Included with the APS 25b is the Auto On-Off circuitry triggered by any audio input signal for hands-off system startup; a high impact case for reliability, and an internal rechargeable battery that can operate the speaker for up to 8 hours. The speaker can be used free standing, stand-mounted (5/8x27 threaded holes on the bottom and side) or wall-mounted with the supplied U-mount bracket.
• The APS 25b-RS2 includes two APS-IR infrared receiver modules, two IRB-10 bodypacks, HS-12 headset/mics and an IRD-10DC external sensor. An included external emitter interconnect cable allows a single sensor to operate both receivers
|@@ Audio distortion:||<1.0%(±40kHz deviation@1kHz).|
|@@ Audio output adjustment:||+4dB max.|
|@@ Audio output impedance:||<1k ohms.|
|@@ Battery type:||2-AA alkaline.|
|@@ Built-in auxiliary mic:||uni-directional electret.|
|@@ Crossover:||1st order passive at 8kHz.|
|@@ Frequency Response:||65Hz-18kHz.|
|@@ Image rejection:||>40dB.|
|@@ Line:||-40dBv (10mVRMS) for 1 watt, 10K unbalanced, RCA jack, variable.|
|@@ Line-Out:||+15dBv max - RCA jack.|
|@@ Mic:||-81dBv (0.089mVRMS) for 1 watt, 100K balanced, ¼" phone jack, variable.|
|@@ Mic gain adjustment:||Max to -50dB.|
|@@ Mic input impedance:||2.2k ohms.|
|@@ Mic input jack:||3.5mm.|
|@@ Rated Power:||20 Watts continuous.|
|@@ Reception selectivity:||± 40kHz.|
|@@ Reception sensitivity:||>25dBµV.|
|@@ Sub-carrier frequencies:||2.06MHz & 2.56MHz switchable.|
|@@ Tone Control:||-6dB/octave sliding low pass (3kHz to 8kHz).|
|@@ Tweeter:||1" (25mm) dome.|
|@@ Type:||super heterodyne-crystal controlled.|
|@@ Woofer:||5.25" (133.35mm) high efficiency - magnetically shielded.|