Visit our Daily Deals
for great products at low prices.
- IP 43, I, with strengthened insulation for additional protection; can take splashed water at a 60° angle from vertical
- Ignition overload protection
- The required light output can be set (100 - 60% adjustment range) with the power regulator.
- 2- 3.15A Fuses
- Meets CE Standards
- Temperature monitor
- Yellow LED has not lit up: the ballast is not grounded, or connected correctly
- Convection cooling
- To disconnect, press the security mechanism on the socket before pulling out the plug.
- To connect the ballast unit to the fixture just plug in the corresponding connection.
- Installation is quick and without any tools, due to a locking mechanism. The optimized design of this reflector achieves a high light output and a homogeneous illumination.
- Color temperature can change with the power output depending on the type of lamp used.
- Four leaf barndoor set helps shape the light
- Full and double scrim help control the intensity
|Green LED is flashing:||the thermo protection is activated reducing the power continuously down to 60%|
|Green LED is lit continuously:||normal operating mode|
|HMI Ballast: Cable:||13' (4m) with fixture|
|HMI Ballast: Dimensions:||9.25 x 6.3 x 3.3"
23.5 x 16 x 8.5cm|
|HMI Ballast: Rating:||200 watts, 90-265VAC|
|HMI Ballast: Weight:||3.74 lbs
|Hot Restrike:||Socket and switches are equipped to allow switching the fixture on and off repeatedly without the delay of waiting for the bulb to cool.|
|Kit Weight:||10.25 lbs
|Lens Set:||Each lens has a color-coded handle for easy identification.|
|Light Fixture: Dimensions:||6.75 x 5.85 x 4.3"
17.1 x 14.9 x 11cm|
|Light Fixture: Lens (Condenser):||4 Lens Set with Bag: Narrow, Medium Spots, Wide, Very Wide Floods|
|Light Fixture: Mounting:||Baby (5/8")|
|Light Fixture: Rating:||200 watts|
|Light Fixture: Socket (Lampholder):||GZY 9.5 for 200W SE HR lamp|
|Light Fixture: Weight:||2.6 lbs
|Red LED Blinking:||the mains voltage has dropped below 85 V. If this LED is flashing, the lamp will be switched off automatically.|
Subcategories of Cameras & Photography:
Bron Kobold DW 200 PAR AC Flight Kit with 200 watt HMI Head Ballast Lamp PAR Reflector & Scrims (Case not Included) Review:
No reviews are available for this product.