You're not still rocking those foam stomp pads are you? Either way this is going to be an upgrade, an upgrade that you and your friends will appreciate. "Like AWD for the lift line" - Burton.
|Burton Mini Scraper Mat||$5.56 - $7.95|
|Burton Large Scraper Stomp Pad||$8.93 - $11.95|
I bought this guy for my boyfriend who is learning to snowboard. He's learning pretty fast but is still confined to the blue groomers. I rode with him last week and he mentioned he was falling while getting off of the lift because he was slipping on his stomp-pad-free board. Skeptical, I quickly went on Backcountry and ordered the "solve to his problems." Needless to say... he may have taken a few falls while using his new found traction, at no fault of the Burton Large Scraper Mat.
So far it's worked fairly well, although I'm interested to see how it holds up over time. While taking the backing off to stick it to the board, the double sided tape started coming off of the stomp pad on the edges. Hopefully this doesn't cause the edge to come up, resulting in "more falling off of the lifts" for the bf.
This is a great stomp pad. It is made of hard rubber and appears to be very durable. However I decided to return it before I mounted it because of the way it fit with my snowboard boots. The scraper is about twice as tall as the spikes, making this more of a scraper pad than a flat stomp pad. My boots are flat across the bottom, making it teeter on the taller scraper portion of the pad. If you have a raised arch on the bottom of your boots this stomp pad will work great, you'll be able to steer, scrape, and keep your boot on the board while in the lift line. The pad is large and goes almost to the edges of the board. The clear is slightly foggy, but is still the best way to have a stomp pad and preserve your graphics.
This stomp pad is great, I don't fall getting off the lift anymore and it really helps with my straight glides. Also great for just getting snow off your boot before strapping in.
It is on the large side (which I like since it provides more grip that way), but since it's clear I don't feel that it messes up my graphics at all.
I have this stomp pad on three boards. I love it! This pad provides the grip necessary when coming off the lift, or when shredding down the mountain with one foot out. I bought the same stomp pad for my wife and son, and they both love it as well.
Used it twice already and both times proved to be great. Good for scraping snow off your boot and for getting off lifts foot never slips.
Its classy and better yet it works the first time. Good product.
Stomp pad worked great while it was there. 2nd day out it fell off somewhere on the mountain. Before applying the pad I cleaned the board very well and applied it very meticulously. It was extremely cold the second time I was out (16- 18 degrees) so maybe that had something to do with it.
I did buy the medium mat for my GF's board and hers seems to be sticking just fine. I had a devil of a time getting all the leftover stickum off my board though.
After only two or three runs with light use. Looked sketchy putting it on my board as the adhesive double sticky tape stuck to the clear pull tab plastic and not the stomp pad. Could maybe stick it on with epoxy I guess but I rather returning and not mess up my graphics
Complete garbage. Arrived with the glue already off. Automatic return.