Cisco WAP4410N Wireless-N PoE Advanced Security Access Point

Priced: $159.99
Visit our Daily Deals for great products at low prices.

Support and Cushioning:

  • Supports high-bandwidth applications with the 802.11n standard; backward compatible with 802.11b and g devices


  • Simplifies installation and configuration with easy-to-use web interface


  • Protects business information with enhanced security, including rogue access point detection, advanced encryption, and select access filters
  • Connects to Power over Ethernet devices, simplifying installation and eliminating the need for and cost of installing external power supplies
  • Advanced, High-Performance Wireless Access for the Small Business
Want it cheaper? Set your own price.
Enter the price you want to pay and we'll email or text you if we find a store that will sell it for that amount:
Price: $
Your email:
Cell number: (optional, for text message)
Learn how offers work...
Average Price History: Price History
802.11d regulatory domain:Enables the access point to provide radio channel settings for client devices, facilitating easy client access as they move across regulatory domains
802.1X:Wireless clients can be authenticated through IEEE 802.1X
802.1X supplicant:Supports 802.1X supplicant on the Ethernet port to allow the access point to authenticate itself to the network
Access control:Wireless connection control: MAC-based
Antenna gain in dBi:2
Auto-channel selection:On boot-up, the access point selects the least congested channel
Cabling type:Unshielded twisted pair (UTP) Category 5e or higher
Channels:Operating channels: 11 North America, 13 most of Europe (ETSI and Japan)
Client isolation:Supports wireless client isolation between and within SSIDs
Diagnostics.:Flash, RAM, LAN, WLAN
Dimensions:W x H x D 6.69 x 6.69 x 1.60 in. (170 x 170 x 40.7 mm)
Dynamic Host Configuration Protocol:DHCP client
Event logging:Event logging - Email logging - Remote syslog -
External antennas:3 (omnidirectional)
HTTP Redirect:Redirects initial user access to an external web server to display company logo or network usage policy
IPv6 host:Support for management and control of access point over IPv6 Supports RFC2460 (IPv6 protocol) and RFC4294 (IPv6 node requirements)
Internal antennas:None
LEDs:Power, Ethernet, Wireless, PoE
Load balancing:Allows bandwidth control with user-defined CPU usage ratios
Multiple BSSID:Supports up to 4 BSSIDs, allowing the creation of multiple virtual access points
Operating modes:Access point mode, point-to-point bridge mode, point-to-multipoint bridge mode, repeater mode, wireless client mode
Operating system:Linux
Ports:Ethernet, Power
Power:12V 1A DC input, and IEEE 802.3af compliant PoE - Max power draw: 10.1W
Product Warranty:Limited lifetime hardware warranty with return to factory replacement.
Quality of Service:4 queues - 802.1p VLAN priority - WMM wireless priority - Mapping of 802.1p VLAN priority to WMM wireless priority to maintain end-to-end QoS
RADIUS server:Up to 2 RADIUS servers can be configured for redundancy purposes
Receiver sensitivity:802.11.n: 300 Mbps at -69dBm - 802.11.g: 54 Mbps at -73dBm - 802.11.b: 11 Mbps at -88dBm
SSID broadcast:SSID broadcast enable/disable
SSID to VLAN mapping:Supports mapping of SSIDs to VLANs to securely separate workgroups across wireless and wired domains
Simple Network Management Protocol:version 1, 2c
Spec/modulation:Radio and modulation type: 802.11b/DSSS, 802.11g/OFDM, 802.11n/OFDM
VLANs:Supports 802.1q - up to 4 VLANs
WEP/WPA/WPA2:Wired Equivalent Privacy (WEP) 64-bit/128-bit, WPA-Pre-Shared Key (WPA-PSK), WPA2-PSK, WPA-ENT, WPA2-ENT
WPS:Supports WPS, a WI-FI Alliance specification for simple and secure setup of a wireless network
Web firmware upgrade:Firmware upgradeable through web browser
Web user interface:Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
Weight:0.86 lb (39 kg)

Subcategories of Computer Accessories:

Cisco WAP4410N Wireless-N PoE Advanced Security Access Point Review:

No reviews are available for this product.