Anyone worldwide may purchase this FOX Racing Shox product, however, the delivery address must be inside the United States.
The Fox Float uses an air spring, which keeps the weight very minimal. The Float has 100mm of buttery smooth golden travel. Add this to any trail bike and you’ll have the ultimate setup for any trail. Roll down steep terrain, mow over rock gardens, and bomb through singletrack. Most simply put, tackle anything that comes your way. The Float is extremely strong and will guide you through safely. The Float’s air spring now has less breakaway force. Fox also upgraded the Float series by giving it a longer negative spring and reduced the air spring compression ratio for a more linear feel. This version of the Float is from Fox’s Factory series forks, therefore the uppers are Kashima coated. In 2013, Fox released their CTD Technology. For 2014, the damping system has been updated for a stiffer feel and even greater control.The most notable change for 2014 was the remote. The remote is much smaller now and fits nicely on your handlebars. The internals of the remote have changed as well and the amount of cable pull necessary to change utilize CTD is far less.
The Kashima coating is a hard anodizing process that fills in any micro pores in the material creating a smoother surface, in comparison to a hard anodization on prior versions. Its distinctive gold color is backed by its high performance attributes including extreme durability as well as an extremely smooth feel. The whole purpose and value of the Kashima coating is its friction reduction properties.
The Fox Float features the FIT cartridge. FIT stands for Fox Isolated Technology. FIT technology employs a bladder system that keeps the oil and air from mixing to provide optimal performance in all riding extremes. Since the FIT cartridge uses much less oil, the weight of the fork is significantly less than one with an open bath style.
The Fox Float utilizes CTD technology. CTD is short for Climb, Trail, and Descend. It is a three position on the fly system that provides three distinct compression dampings that you’d typically need on an average ride. CTD is extremely useful on the trail. The rider is quickly able to flip the lever between the three positions, and which results in being used numerously throughout the ride. CTD is much faster than the older click system, where the rider would have to stop and click through to find the proper setting.
Climb mode has the firmest low- speed compression, which maximizes pedaling efficiency and has minimal suspension movement. Internally, the oil flow is restricted, and can only flow through the Climb port, which limits the suspension’s movement. In the event of a hard impact, the spring loaded blow- off valve will allow the damper to go into its travel. Trail mode provides an optimal blend of pedaling efficiency and control on variable terrain. The oil flow is opened to the mid and high speed compression shim stack. Descend mode provides the rider with the most active suspension. Descend mode is an optimized low- speed compression setting which provides the perfect balance of control and plushness for steep, aggressive descents. Oil is able to flow through the high, mid, and low speed ports. The Float comes with a handlebar remote, so switching from Climb to Trail to Descend is a snap. The lever for 2014 is much smaller than the year prior. The streamlined design fits nicely on your bars.
Climb, Trail, and Descend mode technology will change the way you ride. CTD makes it easier for the rider to adjust their fork to adapt to the terrain ahead. For 2014, the weight has been reduced, yet the fork feels stiffer due to the improved damping system.
|Intended Use:||XC/ Trail Mountain Biking|
|Fox Racing Shox 32 Float 100 Remote Fit||$299.00 - $862.50|
|Fox Racing Shox 32 Float 29 100 FIT CTD Remote Fork||$922.50|
|Fox Racing Shox 32 Float 27.5in 100 FIT CTD w/ Trail Adjust Fork||$842.50|
|Fox Racing Shox 32 Float 120 CTD Remote Fit 27.5" Fork||$922.50|