Anyone worldwide may purchase this FOX Racing Shox product, however, the delivery address must be inside the United States.
The Fox Talas is the ultimate fork for variable terrain. Flick the Talas knob into the short position and you’ll have 110mm of travel that’ll keep you balanced and steady as you climb up the back side of the mountain. The law of gravity states that: what goes up must come down. So, switch the Talas knob back and you’ll have 140mm of buttery smooth travel, perfect for mowing down rocks, branches, roots, and anything that may cross your path. For 2014, The Talas features an updated damping tune for even greater control. The handlebar remote has also been redesigned and is smaller and sleeker.
To ensure that your travel is buttery smooth, Fox has added Kashima coating to the uppers. Kashima coating is a hard anodizing process that fills in any micro pores in the material creating a smoother surface, in comparison to a hard anodization on prior versions. Its distinctive gold color is backed by its high performance attributes including extreme durability as well as an extremely smooth feel. The whole purpose and value of the Kashima coating is its friction reduction properties.
The Fox Talas features the FIT cartridge. FIT stands for Fox Isolated Technology. FIT technology employs a bladder system that keeps the oil and air from mixing to provide optimal performance in all riding extremes. Since the FIT cartridge uses much less oil, the weight of the fork is significantly less than one with an open bath style.
The Fox Talas features CTD technology. CTD is short for Climb, Trail, and Descend. It is a three position on the fly system that provides three distinct compression dampings that you’d typically need on an average ride. CTD is extremely useful on the trail. The rider is quickly able to flip the lever between the three positions, and which results in being used numerously throughout the ride. CTD is much faster than the older click system, where the rider would have to stop and click through to find the proper setting.
Climb mode has the firmest low- speed compression, which maximizes pedaling efficiency and has minimal suspension movement. Internally, the oil flow is restricted, and can only flow through the Climb port, which limits the suspension’s movement. In the event of a hard impact, the spring loaded blow- off valve will allow the damper to go into its travel. Trail mode provides an optimal blend of pedaling efficiency and control on variable terrain. The oil flow is opened to the mid and high speed compression shim stack. Descend mode provides the rider with the most active suspension. Descend mode is an optimized low- speed compression setting which provides the perfect balance of control and plushness for steep, aggressive descents. Oil is able to flow through the high, mid, and low speed ports. This version of the Talas comes with the remote. Attach the remote to the handlebar and easily switch through the CTD modes. Link your Fox rear suspension to the lever as well, and enjoy matched front and rear settings. This makes it easy to change the bike’s suspension characteristics on- the- fly.
This particular Fox 34 29” fork features a G2 offset (51mm). While keeping the wheel base the same, the G2 offset reduces the horizontal distance between the steering axis and wheel center by offsetting the fork which improves handling on 29” bikes. The hand position moves back and the fork offsets forward which reduces trail without affecting the headtube angle.