Gopro Handlebar/Seatpost Mount

Priced: $19.95 - $20.00 Rated:   - 4 stars out of 5 by 22 reviews.
Gopro Handlebar/Seatpost Mount -

Part of the beauty of the GoPro HD Hero Camera is its go-anywhere versatility. And to make the most of it, you may want to be able to mount the camera securely to your bike. With the GoPro Mounting Clamp, you can attach your camera to any round or semi-round tube from 19 - 35mm in diameter. So you can have your camera on the chainstays, seatpost, handlebars, or even on the fork legs. Whatever view you choose, you can capture it.

The GoPro Handlebar Mounting Clamp includes the tool-free handlebar clamp and a three-way adjustable pivot arm so you can position the camera housing at any angle relative to the clamp.


  • Fits 0.43" - 0.7" (11mm –18mm) diameter tubes with additional adaptor (included)


  • Clamp mounts on tubes, frames and other objects with diameters ranging from 0.75 - 1.4 in.


  • Compatible with ALL HD HERO Original, HD HERO2 + HD HERO3 Professional Cameras
  • Comes with pivoting orientation arms allowing for 3-way adjustability, ensuring you can get the angle you want.
  • Attach your GoPro camera to handlebars, seatposts, ski poles and more
  • Mount is compatible with all GoPro quick-release cameras including the Helmet Hero Wide, Motorsports Hero Wide, Motorsports Hero, Surf Hero, and Wide Hero cameras
  • Can be used to create a handheld boom
  • Includes 1 Bicycle Handlebar / Seatpost Clamp and 1 Three-way Adjustable Pivot Arm
Paragon Sports
The Ride HERO is a tube clamp for mounting your quick-release GoPro camera on to bicycle handlebars, seatposts, frames or any pole ranging from 0.75″ to 1.4″ (1.9cm – 3.5cm) in diameter.
You can also clamp to chainstays, small roll bars, bolt-heads, windsurfing and kitesurfing control bars, or even use to create a handheld boom – any pole that is in the size range above.
Comes with pivoting orientation arms allowing for 3-way adjustability, ensuring you can get the angle you want.
Compatible with all GoPro quick-release cameras including the Helmet HERO Wide, Motorsports HERO Wide, Motorsports HERO, Surf HERO, and WIDE HERO cameras. Not compatible with the Digital HERO 5 Wrist Camera.

GoPro HD Hero Handlebar/Seatpost Mount: The GoPro HD Hero Handlebar//Seatpost Mount is a seatpost and handlebar tube clamp for mounting your quick-release GoPro camera on to tubes/frames ranging from 0.75" to 1.4" (1.9cm - 3.5cm) in diameter.


The GoPro Handlebar/Seatpost Mount lets you attach your camera both at the front and back of your bike. This mount fits around bars from 0.75 to 1.4" in diameter, and keeps your camera secure and stable while you ride. This GoPro mount also includes a 3-way adjustable arm that lets you change the angle of the camera.

The Handlebar Seatpost Mount from GoPro allows you to attach your GoPro to handlebars, seatposts, ski poles, kitesurfing control bars or virtually any 0.43" - 0.7" (11mm –18mm) diameter tube. You can also clamp this mount to chainstays, small-diameter roll bars and bolt heads, or secure it to a length of pipe to create a handheld boom. The included 3-Way Pivot Arm makes aiming easy, so you can achieve the perfect angle for every shot.


The GoPro Handlebar/Seatpost camera mount lets you easily and securely attach your GoPro camera to seatposts, handlebars, chainstays, roll bars, bolt heads, booms, control bars and more.

The GoPro Handlebar Seatpost Mount features 1 bicycle handlebar/seatpost clamp, a 1 three way adjustable pivto arm, and a 1 year warranty.
FEATURES of the GoPro Handlebar Seatpost Mount.

Half-Moon Outfitters
Warranty: 1 Year
Want it cheaper? Set your own price.
Enter the price you want to pay and we'll email or text you if we find a store that will sell it for that amount:
Price: $
Your email:
Cell number: (optional, for text message)
Learn how offers work...
13 people have already set their own price.
Average Price History: Price History
Review RatingNumber of Reviews
Clamp Diameter:0.75″ to 1.4″ (1.9cm – 3.5cm)
Dimensions:2.5 x 2.25 x 0.75 inches
Hardware:stainless steel nuts and bolts
Upc, Ean, Isbn:185323000064
Warranty:1 Year
Weight:0.8 oz / 23 g

Similar Products:

Gopro Handlebar Seatpost / Rail MountGopro Handlebar Seatpost / Rail Mount$19.99

Subcategories of Accessories:

Related Categories:


Gopro Handlebar/Seatpost Mount Reviews:

Positive Reviews:

Convenient but not always the answer

I bought the GoPro(2) for use on my motorcycles, though who knows what else I'll wind up using it for over time. Thought a bar clamp would be a good alternative sometimes to a helmet mount (or, as some have done, mounting on clutch fluid reservoir, which isn't an option on one of my bikes due to the hand guards there).

The mount is really easy to fit, and seems to hold solidly. Footage shot with it was free of excessive vibration, so that's good.

A couple of things I didn't like. It's inevitable, of course, that the way it comes together and holds on the bar/post means you need a certain amount of clearance. Unfortunately, on one of my bikes, there is no place where I have enough, so I couldn't use it.

In addition (and this is a general flaw with the GoPro as opposed to some other brands of cameras) the way you're limited to up/down or side/side adjustments on fixed rails means you can't necessarily point the camera where you want with these things. Not an issue if you have a straight bar, of course, but on my bike, a real problem.

To get around that, I'm going to switch to a RAM ball mount, which of course gives infinite adjustment possibilities in all directions.

Still, this does the job if your bar alignment is right, it's removable which lets you move from bike to bike easily, and holds it on safe and secure, so for the right application, I would buy again.
StriderD80 at REI on 05/05/2013

This mount is really good for skiing when you mount it on a pole especially when you ski powder as it creates a really cool shot. Before I bought it, I thought that it might be a bit awkward skiing with only one pole and the other one straight out but it is very easy to get use to. If you use your skiing pole, you will most likely need to use some kind of tape (I used clear hockey tape) to increase the diameter of your pole so that the mount will not slide around. Also I used a screwdriver to tighten the thumb knobs because they will move under fast jerking movements.

Jeff at on 04/13/2013

Perfect for biking videos

I had already purchased GoPro mounts for my bike helmet and head, but when I saw this product, I knew it was the ideal set up. Even though the camera is fairly light, you do feel its weight when you have it mounted on your helmet. So, having the option to mount it on the handlebars or seat was just what I needed. The various adapters were perfect to give me the flexibility to install the camera where it would best capture my videos. Of all the adapters I have, I think this one will get the most use.
Egidio at REI on 10/10/2013

Cool Mount but a little Flimsy

Very cool mount I have used it a lot. Lets you get places that you could not before. However you have to be careful not to overtighten. The mount is made from plastic and if you tighten too much it can break. Also what I did was take a small peice of innertube and place it on the inside of the mount to reduce slippage. I used this mount on both videos in this review.
rjrjoyce at REI on 06/06/2012

Excellent product

Used this product to attach a GoPro to the front of my Harley Davidson. The problem was that my bike has a windshield that blocked the camera lens when mounted to the handlebars. I had to rig it to the fog light bar which is of smaller diameter than the GoPro Mount. A little shimming with scrap leather and all is well!!
Steve at Campmor on 06/06/2013

I got this specifically to mount to motorcycle's frame/swingarm spools/frame sliders and handle bars. It worked perfectly for all the applications. The only thing I would recommend is that you find something to line the inside of this with (foam/rubber etc.) to prevent the mount from easily turning once mounted. Other than that, great product, works great!

Eric Brammer at on 02/06/2013

Don't think of this as a bike mount. Think of it as a tube mount. You can mount it anywhere! I love experimenting with it. I have it on a pole secured on my backpack looking down towards me. Great shots when climbing or skiing.

Bernardo Gomez at on 09/30/2013

Works on a trekking pole!

I specially purchased this to mount my gopro on a telescoping trekking pole for self summit shots (I climb alone often). This set-up eliminates the use of an additional telescoping device and drops the extra weight. Overhead shots look amazing! =)
aLiEn-aBdUcToR at REI on 10/10/2013

This thing will go anywhere round, which is great because I'm always trying to find new places to put this thing. As others mentioned always a good idea to line the the object you are clamping too with tape or foam.

Jake at on 05/05/2013

Good and firm mount, very versatile!

This mount is very versatile and fits a long range of bars, posts and so on.

The mount is firm and withstands alot of "beating" and shaking and still holds the angle that you have mounted it in.
Maaloy at REI on 05/05/2011

Negative Reviews:

Avoid at all costs.

Avoid this particular camera mount at all costs. It is not built strongly enough to support the camera, period. The adjustability is great and it's easy to position the camera to get the shot you want, however the critical little plastic post between the mount and the camera will fail you! It's only a matter of time. For me, the mount snapped on the first ride, destroying my camera. I was on a road bike, riding on paved road. Granted, the pavement was mostly of the chip-seal variety, but everyone hits some kind of "bump" on the road every once in a while, on even the most manicured strip of asphalt. Until GoPro updates this product with a more substantial material to comprise the post, do not trust it. You will lose your camera.
JeremyC at REI on 09/09/2013

poor quality and not functional

I bought this handlebar mount to do a timelapse of a six day road bike ride I was doing through the Rocky Mountains. I mounted it properly and had everything secured and ready to go. On the first day, the camera would get jostled over the slightest bumps and I'd have to keep adjusting it to get it to film what I wanted. After 70 miles of this, the mount sheared off as I was riding down the road at 25mph, leavinng the camera bouncing in the pavement. This is DANGEROUS and I'm lucky no one got hit by it. This mount is a true hastle and does not stay steady on even the smoothest roads. I do not recommend.
COoutdoor at REI on 06/06/2012

Too small for most MTB Frames

While it is a good idea, for mountain biking, it has limited uses. This is because most modern bikes have larger tube diameters than what this is designed for. You are limited to either the Seatpost, handlebars(but who would want to shoot video that is constantly moving side to side everytime you make stearing adjustments), or I have mounted it on the outside of my front suspension Fork(but the suspension makes it a steadier picture). For $20, maybe a little more campatibility would be nice. So I had to pay another $25 for the Roll bar mount.
muttonchopper at REI on 05/05/2011

Not suited for MTB

I got this in hopes of capturing footage from perspectives other than the top of my head while mountain biking... BIG DISAPPOINTMENT!

No matter how hard you tighten the screws, the slightest bumps and jumps cause it to jerk out of position, leaving you with annoying footage of your knees, wheels, etc.

Works OK for road riding, provided you avoid potholes...
Cyclin at REI on 06/06/2011

First time used and it is broken. The kit does not support a common Montain Bike ride (it was a XC ride, not a downhill). The kit broke at 2 first Km... I really reccomend who want a bar kit for GoPro to seek other than original.

cor100319674 at on 01/05/2013