Jenson USA (2009)
Marzocchi created the first long travel single crown fork and the 66 Series of forks continues the tradition of dual crown performance in a single crown design, it's lightweight and gives you 180mm of travel to soak up the big hits.
Features:
- 8” Post Mount (Max Disc Size: 9”)
- ATA + PAR (40mm Air Travel Adjust, Positive and Negative Air, Progressive Air)
- ATA: The ATA (Air Travel Adjust) is a dual air spring. It has two air chambers that control the beginning and end stroke of the fork. The ATA system allows to adjust the pressure of the positive air chamber. The negative chamber balances in an automatic way. Air pressure values will vary depending on the rider, terrain, preferred travel positions and personal preferences. The rotation of the Silver-colored ATA knob installed on top of the fork leg, allows adjusting the stroke and the height of the fork in an infinite number of positions within a range of 40 mm.
- Adjustable from 140mm to 180mm Travel
- Air Spring
- Aluminum Steer TubeS8mm Nickel Coated Alloy Tapered StanchionsR0mm QR Torque Axle
- Crown Offset: 14mm
- PAR: The lower air valve is the PAR (Progressive Air Resistance) chamber. PAR is to adjust the progression of the spring rate and control bottom-out. The PAR valve is on the lower part of the fork leg and is protected by a red protection cover.
- Published Weight: 2812g
- RC3 (Rebound & Hi-Lo Auto Compression Adj)
- RC3: Is the leading-edge Open Bath technology by Marzocchi. The RC3 damping system ensures the maximum freedom of adjustment for a free and performing way of riding. The rebound control can be adjusted by means of the black-colored knob that is installed on the top. The Position Sensitive Compression system allows automatic bottoming control at high and low speeds by means of the compression adjustment red-colored knob, which is installed in the lower part of the fork leg. By means of the VA adjuster (installed in the RC3 cartridges for 888), every rider can adjust the air volume inside the fork by simply turning the VA knob. The variation of the volume inside the fork is the same as a virtual modification of oil levels. By simply rotating the adjuster ring you can reduce the air volume, this achieving an increased progressiveness equivalent to an increase in the internal oil volume.
- Total Fork Length: 564mm
- Total Offset: 46mm
- Wheel Axle Offset: 32mm
Jenson USA (2008)
The Marzocchi 66 ATA was inspired by countless runs in Whistler’s MTB park and the desire to have a lightweight, long travel single crown fork with 888 performance. With it's advanced ATA and RC3 adjustments and 140mm to 180mm of adjustable travel the 66 ATA is a highly customizable fork that fits in perfectly on the Freeride or Downhill scenes.
Features:
- 140mm to 180mm Adj. Travel
- 8” Post Mount (Max Disc 9”)
- ATA (Air Travel Adjust)
- Air Spring
- Aluminum Reinforced Steer Tube10.25" longS8mm Nickel Coated Alloy Stanchions
- New QR Axle
- RC3
- Weight: 6.4 lbs. (with axle)S Year Manufacture Warranty
){kind=small}
){kind=small}
