The very compact and rope-friendly Microcender from Petzl is designed for use in self-belaying on a fixed rope. It does not have a quick attach and release system, but rather is installed on the rope using a removable pin. It completely encloses the rope, greatly reducing the chance of accidental disengagement. The device will slip on the rope if overloaded.
Features:
- 3-year guarantee
- CE / UIAA certified; 162 g
- Axle piece is removable so the device can be installed or removed at any point on the rope
- For use with single ropes from 9 to 13 mm
- The pin makes it difficult to remove device from rope involuntarily
- Pin and axle are attached to the body of the ascender
- Read instruction manual and warnings carefully before using.
Fit the extra-small Microcender ascender from Petzl into a shirt pocket and take it with you. Weighing only 5.5 ounces and able to accommodate a rope up to 1/2, its strength actually exceeds that of most other ascenders, despite its small size.
The Microcender Ascender by Petzl is a compact and lightweight ascender without handle. The Microcender is intended for self-protection on a fixed rope, pulley systems or hauling heavy loads.
The MICROCENDER Rope clamp/grab a smaller version with the exact same features as the Rescucender.
| Certification: | CE EN 567/UIAA |
|---|---|
| Country of Origin: | US |
| Material: | Aluminum frame |
| Materials: | Aluminum frame |
| Rope Range: | 9-13 mm |
| Rope diameter: | 9 to 13 mm |
| Standards: | CE - UIAA. |
| Weight: | 5.7 oz. |
| Weight (Grams): | 162 g |
Similar Products:
 | Petzl Microcender Rope Clamp | $61.95 |
Subcategories of Belay & Ascend:
Related Categories:
