|
|
IT’S UNFORTUNATE YOU DON’T HAVE A SECOND SET OF ARMS. BECAUSE THEN YOU’D BE ABLE TO LOAD KAYAKS TWICE AS EASY. BUT SINCE YOU DON’T, THE BOATLOADER’LL GIVE YOU A HELPING HAND.
(Does not apply to arachnids, as they may have up to four sets of arms, so if you’re an arachnid, simply disregard this section.)
- Makes loading boats onto tall vehicles as easy as if you had your own personal Bigfoot helping you
- Extendable arm retracts when you’re not hoisting boats
- Keeps boats from dinging your car or falling on your toes
- Corrosion-resistant construction and hardware
Q: Can I carry loads on it?
A: The BoatLoader is to be used only for loading and unloading. Do not attach accessories or attempt to transport loads with it.
Q: What is it made of?
A: The main bar is an aluminum sleeve over a solid steel core. Bolts are stainless steel and the nuts are brass.
Q: What size wrench is used to install it?
A: A 3/16” hex wrench, and it comes with the kit.
Going it alone? If you need help getting your boat on your car rack, the Boat Loader can lend an arm. Prop one end of your boat up on the extension and then lift the other end onto the rack. The Yakima Boat Loader retracts into the Yakima round cross bar when not in use. Extends 28" from end of crossbar to support even the largest canoes and kayaks. Helpful in getting heavy loads onto taller rooftops. Solid steel bar has an aluminum over-sleeve for corrosion resistance and boat finish protection. Retracts out of the way when not in use. Includes 3/16" hex wrench, for installation. Fits Yakima round bars exclusively.
Going it alone? If you need help getting your boat on your car rack, the BoatLoader can lend an arm. Prop one end of your boat up on the extension and then lift the other end onto the rack. The Yakima BoatLoader retracts into the Yakima round cross bar when not in use.
The Yakima BoatLoader provides assistance for loading boats on tall vehicles. The BoatLoader is a telescoping crossbar extension to aid in one-person boat loading and unloading. Its intuitive design helps keep the boat away from the car while loading. When you’re cruising boatless down the highway, the extendable arm retracts into the roundbar. Who needs an extra set of hands? Let your Yakima rack do the work!
The Yakima BoatLoader is a roof rack accessory to help you get your boat on the car without sapping you of all of your strength. The BoatLoader installs into your Yakima CrossBar so that you never have to lift more than half the weight of your boat. Just lean it against the BoatLoader and walk it onto the rack. The BoatLoader protects your car from scraps and dings because it keeps the boat clear of the car body.
Tall vehicle? Heavy boat? Tired arms? This is the graceful solution for overcoming the challenges of going from car top to water and back again!
The Yakima BoatLoader provides assistance for loading boats on tall vehicles. Specifically, the BoatLoader is a telescoping crossbar extension to aid in one-person boat loading and unloading. Its intuitive design helps keep the boat away from the car while loading. When you're cruising boatless down the highway, the extendable arm retracts into the roundbar.
| Attachment: | Round bars |
|---|---|
| Capacity: | n/a, not used for transport; boat mount accessory |
| Dimensions: | Extends 28” from end of bar, 36-1/2” total length. |
| Locking: | No |
| Manufacturer's SKU #: | 8004018 |
| Weight: | 5 lbs. |
|
View other products from Yakima classified in Travel > Car Racks. View all products from Yakima.
|
Sometimes, we can't be sure that the product is the same across the stores that offer its, so you may find the same product listed more then once on GearBuyer.com, we these list highly similar products below.
 | Yakima BoatLoader Crossbar | $70.00 |
|
|
Gets the job done! | |
| Rating: |  |
| Heavy-duty, sturdy extension fits inside round Yakima bars and extends to give an extra hand when needed. Then slides back into the rack when you're done. This product turned the frustrating task of loading a heavy kayak onto a small SUV by myself from an overwhelming chore into a minor exercise. Relatively easy to install (provided your bars are not corroded inside). Very easy to use and Highly recommended. | |
| webstertiums at REI on 10/05/2007 | |
Lifesaver! | |
| Rating: | |
I frequently have to load/unload by myself, and this helps tremendously by helping me balance the canoe. Seems to bend under the weight at times, but as long as you dont put all the weight near the end while fully extended you are ok. | |
| Brian Bain at Backcountry.com on 09/29/2006 | |
Buy this thing! | |
| Rating: | |
| I have used this product for loading two different canoes including an 81 lb grumman whitewater canoe. Its a lifesaver. Helps with preventing car scratches and simply makes loading and unloading greatly simplified. Installation was a breeze. Ie remove endcap and slide in. | |
| waverhydr at REI on 08/04/2009 | |
Self Reliance/ Yakima Boatloader | |
| Rating: | |
Very ingenious device. Save energy for the water and never strain your back. Kayak or canoe cart as well and new possibilities on where you can go. Delivered on time, good price. | |
| travlr at Backcountry.com on 03/17/2009 | |
Just what I expected | |
| Rating: | |
Received the boatloader very quickly. Still have yet to use it, since it's been kinda chilly this spring up here in MA. But it was sent efficiently and at a great price! | |
| OutdoorTom at Backcountry.com on 05/13/2005 | |
Handy equipment | |
| Rating: | |
I love it,I love it,I love it!!! I don't have to get help loading my 'yak anymore!! | |
| Yakima Fairings at Backcountry.com on 06/04/2004 | |
)
)
)
)
)
)
)
