Kayaks & Boating > Boating & Marine Accessories - Most Popular Products

This 3M(r) One Step fiberglass wax features high-performance polyurethane that becomes tack free in one hour and fully cures in approximately 24 hours. The seal is extremely strong and designed to retain its strength above or below the water line. It also stays flexible to allow for structural movement, with...

The Pacific Ironwood(tm) Anchor Ring uses the flotation of a buoy and the forward movement of your boat to float the anchor to the surface. It's only clipped to the line when you are ready to raise the anchor. It's effective on anchor lines rigged with chain. This Anchor ring...

This 3M(r) Marine Protective Liquid Wax utilizes reactive chemistry and actually bonds to a boat's surface to provide a durable protective surface. It provides a high gloss and is designed to protect fiberglass/gelcoat, marine topside paints, painted aluminum, and marine metal parts. Model Number: 09026Q6 oz Provides a high gloss...

Adapts to virtually any rail or pulpit system Will fit 7/8 to 1- 1/4 tubing at any height or any angle True-Fit Fender Holders are available to fit the most popular fender sizes Simple and strong system is beautifully made of all stainless steel hardware with nylon connectors Unique, patented...

This Camco(r) wheels dock stabilizes the trailer tongue and keeps the wheel from sinking into soft ground. It includes a rode for easy handling. Stabilizes trailer tongue Rope included for easy handling

This 3M(r) Fast Cure 05203 Adhesive/Sealant is designed to effectively absorb the stress caused by shock, vibration, swelling, or shrinking. It can be used for bonding and sealing jobs including fiberglass deck to fiberglass hull, wood to fiberglass, portholes and deck fittings, motors on fiberglass transoms, under mouldings, hull seams...

This 3M(r) Marine Ultra-Performance paste wax is designed to leave a protective, high-gloss finish on marine fiberglass gelcoat, marine topside paints, painted aluminum and metal parts. Model Number: 09030 9.5-oz tube Contains the unique 3M® polymer technology that provides the durability of an acrylic, with the soil release and water...

These Attwood(r) turbo bilge blowers offer an inline design that provides powerful, reliable ventilation for engine compartments, bilges and heads. Turbo 3000 For 3-in I.D. ventilation hoseQ2-volt DC systems only Inline design Open-flow capacity 145 CFM at 13.6 volts; 135 CFM at 12 volts Draws 2.7 amps Mounting feet are...

Designed to remove LIGHT oxidation, clean, polish and protect fiberglassgelcoat and marine topside paints. Unique liquid formulation combines a compound with a special blend of waxes which restore shine and protect in one application. (Rub the oxidized boat's dull surface with your hand, if no chalky residue comes off on...

These Attwood(r) clamp-on oarlocks with 1/2-in x 2-in shanks are construction with zinc-plated steel to resist rust. They fasten securely to the oar with 1 adjustable bolt and no drilling required. Model Number: 9146-3Q pairQ/2-in x 2-in shank Zinc-plated steel Rust resistantQ adjustable bolt

General Marine Standard Contura Rocker Switches - ROCKER SWITCH MOM ON-OF-MOM ON DPDT

The Ritchie(r) F-50 Explorer flush-mount compass offers scientifically matched sapphire jewel and hardened steel pivot dial movement with powerful DirectiveForce magnets for fast heading lock-on. It displays internal green night illumination and has built-in compensators to easily adjust for deviation. Model Number: F-50R 3/4-in easy to read direct reading dial...

ICOM LI-ION BATTERY 2000MAH FOR THE M72

The Ironwood Pacific E-Z Slide Trailer Pads Kit 2 features six, 3-in E-Z Slides, each crafted from a slippery composite that enables the boat to slide smoothly on and off the trailer. Designed for those shallow ramps and difficult launches, the pads mount directly to your existing trailer bunks. 6...

The Ironwood Pacific(tm) Land Anchor utilizes a helix design to provide strong holding power over straight mooring stakes or corkscrew designs. It can be turned into the ground to the desired depth and turned out when time to leave. A, inlcuded nylon carrying bag enables it to be conveniently stored....

The Ironwood Pacific E-Z Slide Trailer Pads Kit 3 features ten, 3-in E-Z Slides, each crafted from a slippery composite that enables the boat to slide smoothly on and off the trailer. Designed for those shallow ramps and difficult launches, the pads mount directly to your existing trailer bunks. 10...

The Ironwood Pacific(tm) Top-Snapper is designed to make fastening your boat canvas easy. If you are inside the boat, simply grab the inside of the snap with the Top-Snapper, align the 2 halves of the snap, and pull it closed from inside the boat. If you are outside the boat...

This ShoreDocker(r) 1200-lb Extra Roller Set for Model SD2000 includes 2 rollers, 2 brackets and hardware. Add it to Model SD2000 when extending beyond 16-ft overall length. Model Number: RS1200 Extra roller set for model SD2000 Includes 2 rollers, 2 brackets and hardware Add to Model SD2000 when extending beyond...

Polyform uses a premium grade long lasting yarn that is colorfast, and resistant to sunlight and abrasion. No seams to split - uniquely woven in a seamless tube Durable, unique weaving process allows for an especially heavy yarn content Easy to install and clean (washable) Limited three year warranty Available...

This spindle seal is designed for use with the Bearing Buddy(r) on trailer axles with brakes or as a replacement seal system. For use with the Bearing Buddy®

ICOM BP-227 BATTERY LI-ION

The Ironwood Pacific DryWave Air Dryer gently warms and dries the air to prevent the formation of mold and mildew on wall surfaces. The energy-efficient design draws no more power than a common household light bulb, making it ideal for boats, RVs, cabins, and homes in spaces up to 1,000...

The Attwood(r) Pro-Series rod holder incorporates a cam-lock adjustment release that you simply flip down, without removing the holder from the mount, for adjustments up to 160-degrees vertically and 360-degrees horizontally for the perfect rod tip position. The offset rod throat keeps the rod free of the neck and and...

The Kwik Tek(tm) life jacket storage bag helps to keep your life jackets organized and clean. The vinyl-coated fabric resists mold and mildew and mesh air vents on 4 sides offer fast drying. It's designed to fit 4, Type II life jackets of boat cushions. Size: 20 in x 12...

The Attwood(r) automatic float switch is designed to convert any bilge pump that draws 12 amps (at 12 VDC) or 6 amps (at 24 VDC) or less to fully automatic operation. It features a compact, low-profile design that mounts on any surface from horizontal up to a 24-degree angle. It...