Seasense Boating & Marine Boating Accessories

Seasense LED Trailer Guide Indicators - The LED Trailer Guide Indicators attach to your trailer and guide the way with 3 bright-red LED diodes each. Helpful when backing tricky trailers, and provide better visibility and safety in the dark. They can be attached directly to your trailer or guide-on posts. 2 pack..

Seasense 338-Piece Electrical Kit - This 338-Piece Electrical Kit includes a huge assortment of all the necessary connectors and terminals for a professional repair or installation on any 12/24-volt electrical system. The kit includes heat shrink tubing for water-resistant connections. Also included are various sizes and colors of: butt connectors, ring connectors, flanged spade connectors, male and female disconnects, wire ties, shrink tubing, and cable clamps. Manufacturer model #: 50031121..

Seasense Anchor Retrieval Ring - The Anchor Retrieval Ring is a first mate's best friend! Simply add a buoy, snap, and short line. To retrieve an anchor, place the ring over the anchor line, securing it to the buoy with the line and snap. Toss the assembly in the water and run your boat at a 45-degree angle from the anchor. The ring and buoy will be forced down over the shackles, chain, and fluke, releasing the anchor from the bottom and floating it to the surface.

Seasense Chrome-Plated Zamak 3" Bow Eye - This Chrome-Plated Zamak 3" Bow Eye is die cast and includes both 5-1/2" and 3-1/4" cadmium-plated shanks, nut and washer. Manufacturer model #: 50062722..

Seasense Nylon EZ Garboard Plug - Never be without a plug again! Keep the Nylon EZ Garboard Plug on your boat keys as a reminder to check your plug. Prevent a spoiled day of boating fun due to a lost or forgotten plug. This temporary 1/2" NPT plug is small, light, and includes a stainless steel key ring. Manufacturer model #: 50032277..

Seasense Recessed Drink Holder - This self-draining Recessed Cup Holder installs almost anywhere—table, countertop, dashboard, seat back—wherever it's convenient. Size 3" x 3". Manufacturer model #: 50091006..

Seasense Toggle Switches - Toggle Switch – On-Off-On Light : black plastic paddle and locking ring with lever seal and knurled cap nut. On/Off for lights, blowers and aerators. Depth behind panel is 1-3/8". Requires 7/16" to ½" installation hole. Max. 15 amp, 12 volt. Toggle Switch – On-Off Light : Illuminated switch comes complete with locking ring and cap nut. Red plastic paddle illuminates under load. Requires 7/16" to ½" installation hole. Max. 16 amp, 12 volt..

Seasense LED Recessed Mount Light - Great for cabin, console or your electronics box, this SeaSense flush-mount LED light is non-corrosive, totally sealed and waterproof for inside or outside use. It’s long lasting LED technology draws less than 10% of the power of incandescent lights. Finished chrome bezel included. 3-5/8" diameter. 12 volt..