Shure MXWS8 Microflex 8-Channel Wireless Microphone System Includes MXWNCS8 Charging Station MXWAPT8 Transceiver MXWANI8 Network Interface
The Shure MXWS8 Microflex 8-Channel Wireless Microphone System brings modern design and vivid, lifelike sound to signature boardrooms and AV conferencing environments. This enterprise-scale platform encompasses a system of advanced conferencing products that includes intelligent rechargeable microphone transmitters and charging stations, discreet wireless access point transceivers, flexible audio network interfaces and comprehensive software tools for remote adjustment and monitoring of system settings.
The MXWNCS8 is a 8 port Networked Charging Station compatible with Microflex Wireless microphone systems. It is designed to complement boardroom aesthetics, Networked Charging Stations easily connect between conference room credenzas and AV rack closets over Ethernet via a single Cat5e cable. The front panel displays battery charge in 5 segment LED's and remaining runtime and charge levels in hours and minutes can be monitored from any networked computer via the control software.
The MXWAPT8 is a 8-channel wireless access point compatible with Microflex Wireless microphone systems. It uses automated frequency coordination to assign clean frequencies to wireless microphones and manages two-way wireless transmission of encrypted audio and control signals. Power to the unit (via PoE) and Dante digital networked audio are both supplied over a single Ethernet cable to simplify installation and the supplied mounting plate and paintable cover allow discreet placement in boardrooms and conference rooms where low visibility is preferred.
| AD/DA Converter: | 24-bit, 48 kHz |
|---|---|
| Analog Connections: Clipping Level: | Output: Line: +26.2 dBV Aux: +16.2 dBV Mic: -3.8 dBV (Minimum) Input: Line: +23.8 dBV Aux: +10.8 dBV (minimum) |
| Analog Connections: Configuration: | Output: Active Balanced Input: Active Balanced |
| Analog Connections: Headphone Output: | Input: 6.35 mm (1/4") TRS, 100 mW, 350 Ohms, dual mono (will drive stereo phones) |
| Analog Connections: Impedance: | Output: 310 Ohms Input: 10.6 kOhms |
| Dante digital audio networking: | Integrated solution for transporting low latency, uncompressed audio over standard Ethernet networks |
| Discreet designs: | With elegant aesthetics and a low-profile footprint, Microflex Wireless systems are designed to install easily and disappear into AV environments |
| Encrypted wireless: | Audio transmission is protected by AES-256 encryption - the same secure standard used in top government applications |
| Ethernet connectivity: | All Microflex Wireless networking components connect via Cat5e cable for simplified installation |
| Latency (Estimated Nominal, ±0.1 ms): | Analog-to-Dante: 0.21 ms Dante-to-Analog: 0.24 ms + TN |
| MXWANI8: Audio Frequency Response: | 20 Hz to 20 kHz (+1 -1.5 dB) |
| MXWANI8: Dynamic Range: | Analog-to-Dante: 113 dB Dante-to-Analog: 110 dB (20 Hz to 20 kHz, A-weighted, typical) |
| MXWANI8: Housing: | Steel; Extruded aluminum |
| MXWANI8: Output Noise: | Line: -84.5 dBV Aux: -95.2 dBV Mic: -106.5 dBV (20 Hz to 20 kHz, A-Weighted, typical) |
| MXWANI8: Polarity: | Non-inverting, any input to any output |
| MXWANI8: Power Requirements: | 100 to 240 V AC, 50-60 Hz, 1 A |
| MXWANI8: THD+N: | <0.05% (20 Hz to 20 kHz at +4dBu analog input, -10 dBFS digital input) |
| MXWAPT8: Antenna Type: | Internal, Special Diversity, Circular Polarization |
| MXWAPT8: Housing: | Molded Plastic, Cast Zinc |
| MXWAPT8: Network Interface: | RJ45: Gigabit Ethernet, Dante digital audio |
| MXWAPT8: Plenum Rating: | UL 2043 |
| MXWAPT8: Power Requirement: | Power over Ethernet (PoE) Class 0, 6.5W |
| MXWNCS8: Charge Time: | MXW1, MXW6, MXW8: 50%=1 hour; 100%=2 hours, MXW2: 50%=1.5 hour; 100%=3 hours |
| MXWNCS8: Housing: | Molded Plastic, Cast Zinc |
| MXWNCS8: Network Interface: | 10/100 Mbps Ethernet |
| MXWNCS8: Power Requirement: | 15 V DC at 3.3 A maximum, supplied by external power supply (tip positive) |
| Network Interface: | Four-Port Gigabit Ethernet Switch, Dante digital audio |
| Operating Temperature Range: | System: 0deg.C (32deg.F) to 49deg.C (120deg.F) MXWANI8: -18deg.C (0deg.F) to 63deg.C (145deg.F) |
| Selectable transmit power: | Select the appropriate wireless output power per room to optimize spectrum usage, range and battery life |
| Storage Temperature Range: | System: -29deg.C (-20deg.F) to 74deg.C (165deg.F) MXWANI8: -29deg.C (-20deg.F) to 74deg.C (165deg.F) |
| System: Audio Frequency Response: | 50 Hz- 20 kHz (+1, -3 dB) |
| System: Cable Requirements: | Cat 5e or higher, shielded, 100 m maximum between network devices |
| System: Dynamic Range: | >99 dB, A-weighted |
| System: Latency: | 18 ms, nominal |
| System: Network Addressing Capability: | DHCP, link-local, static |
| System: Power: | 19 dBm (80 mW) maximum, See Frequency Range and Output Power table |
| System: RF Carrier Frequency Range: | 1920-1930 MHz |
| System: RF Sensitivity: | -87 dBm, minimum |
| System: Radio Transmission: | Time Division Multiple Access (TDMA), Gaussian Frequency Shift Keying (GFSK), 365 kHz max |
| System: System Gain: | +50 dB (Mic gain at 0dB to line level output on MXWANI through Dante) |
| System: Working Range: | 50 m (160 ft) |
| Versatile microphone selection: | Wireless boundary, gooseneck, bodypack and handheld models are available to fit any conferencing application |
| Vivid, lifelike sound: | Performance-tested Microflex microphone elements flawlessly capture full range audio for clear, detailed communication |
| Weight: | MXWANI8: 7.1lbs / 3.2kg MXWNCS8: 6.4lbs / 2.9kg MXWAPT8: 1.9lbs / 0.86kg |
