Beman

Beman ICS Speed Arrow Shafts - Get the most from your high-performance compound bow! ViBrake Hot Tail knocks down noise & tightens groups while Speed’s high-velocity carbon offers a super flat trajectory. ICS Speed shafts combine multi-layer carbon fiber with tight tolerances for strength and accuracy and every dozen comes complete with nocks and inserts included. Straightness tolerance: .003". Weight tolerance: ±2 grains. One dozen..

Beman ICS Hunter Junior Arrows - For bows with draw weights under 40 lbs. High-strength C2 carbon composite shaft with pre-installed Super Nock, CB insert, and 3'' vanes. Weight: 7.3 grains. 6 pack..

Beman Ics Hunter Pro Camo Arrows - Get the look of Realtree APG™ camo weave and the blistering speed of advanced lightweight carbon. Microlite™ S Nocks and ViBrake Hot Tail inserts give a flat, accurate trajectory and hard-hitting downrange impact. Recommended field-point size: 9/32". Inserts and microlite S nocks included. Per 6. Made in USA. Sizes: 500(7.5 gpi), 400(8.1 gpi), 340(8.8 gpi). Lengths: 31.75" (340), 31.25" (400), 30.75" (500). Straightness factor: ±.002". Diameters: .298" (340), .294" (400), .291" (500)..

Beman Classic Mfx Arrows - Sporting the traditional look of PhotoFusion™ wood-grain finish with the advantage of microdiameter MFX carbon construction. ±/-.003" straightness. Direct-fit X Nock installed. HIT inserts included. Fletched with 5" feathers. Per 12. Sizes: 340, 400, 500. Microdiameter MFX carbon constructionFletched with 5" feathersWood-grain finish for traditional look±.003" straigthness.

Beman Easton MicroLite Arrow Inserts - Easton® MicroLite™ Arrow Inserts maintain the precision accuracy of standard CB inserts at less than half the weight! Fitting all CB insert compatible shafts, the MicroLite Arrow Inserts boosts performance and arrow speed, When used with the MicroLite nock, MicroLite inserts are 48% lighter than conventional components for more arrow speed without losing any arrow strength. Weight: 10 grains. 12 pack. Easton® MicroLite™ S Nocks are sold separately and can be found through item search for item number 38-889-887-01.

Beman ICS Inserts - All ICS arrows use inserts which glue inside the shaft, rather than the outserts used on other carbon arrows, for better alignment and truer flight..

Beman ICS Speed Hunt with Blazer Vanes - A blend of high-velocity performance with the quiet, vibration-stopping accuracy of Hot Tail™ ViBrake Inserts. The multilayer carbon-fiber shafts have a black microsmooth finish and are fletched with Blazer vanes for accuracy and speed. Includes ViBrake inserts and pre-installed micro S nocks. Straightness factor and weight tolerance within ±.003" and ±2 grains. Arrows are full length with inserts loose. Per 6. Sizes: 340, 8.1 gpi; 400, 7.4 gpi; 500, 6.6 gpi.

Beman Bone Collector Arrows - Shafts have a microdiameter for increased penetration, low wind drift, heavier mass for power and patented HIT inserts for broadhead alignment and accuracy. Twister Vanes aid accuracy and speed. Direct-fit X Nocks come installed. Inserts included. Per 6. Made in USA. Recommended field-point sizes: 9/32" (340), 17/64" (400). Sizes: 340 (9.5 gpi) 400, (9.0 gpi). Lengths: 32" (340), 31.5" (400). Straightness factor: ±.003". Weight tolerance: ±2 grains. Diameters: .267" (340), .264" (400)..

Beman Ics Bowhunter Arrow With 2" Xpv Vanes - The ICS Bowhunter is a lightweight yet super-tough, hunt-ready carbon-arrow package. They come standard with direct-fit Super Nocks and CB inserts, and are fully compatible with vibration-dampening ViBrake™ nocks and inserts. Bowhunter provides the perfect balance of speed and strength to take down big game, and long-lasting durability needed to fill your freezer and your trophy room. Recommended field-point size: 9/32", 18/64” (not included). Nocks and 2" XPV vanes are installed.

Beman Ics Hunter Procamo Shafts - The hot look of Realtree camo weave and the blistering speed of Beman’s most advanced lightweight carbon. Equipped with the MicroLite™ SNocks and ViBrake Hot Tail inserts—giving bowhunters a flat, accurate trajectory plus hard-hitting downrange impact. Straightness: ±.002". Weight Tolerance: ±2.0 grains..

Beman Vibrake Nock - This patent-pending, vibration-dampening nock stabilizes the arrow in flight by eliminating vibration from within the arrow. Fits most standard carbon arrows. Per 12. Colors: Neon Green, Neon Orange..

Beman ICS Hunter with Blazer Vanes - These shafts introduced the bowhunting world to the lethal and revolutionary Hot Tail™ ViBrake vibration dampening and group-tightening inserts. This patent-pending insert technology quickly stabilizes the arrow in flight and increases its accuracy. Direct-fit S nocks installed and ViBrake inserts loose. Per 6. Sizes: 500 (7.3 gpi), 400 (8.4 gpi), 340 (9.3 gpi). Length: 32¾". Straightness factor: ±.003". Wt. tolerance: ± 2 gr. Dia: 0.287" (500), 0.294" (400), 0.298"(340)..

Beman Bone Collector Shafts - A powerful blend of accuracy, durability, and penetration–the shaft of choice for Bone Collectors everywhere. Micro-diameter MFX carbon construction for all types of heavy-boned big game. X-nocks installed; HIT® inserts are included. Straightness: ±.003". Weight Tolerance: ±2.0 grains..