C.sherman Johnson

C.sherman Johnson Sole Mate Ladder Tread - Molded plastic tread fits 1" round stainless ladder rungs to provide a secure place to plant your feet. Use one per rung, alternating right and left sides. Note: Requires ladder steps at 90° to uprights..

C.sherman Johnson Quick-Release Shroud Levers - Permit easy rigging adjustments, and allow masts to be stepped and unstepped easily. The lever is easy to open and close under load and has a quick release pin for security. Working Load Small: 400lb.; Large: 1000lb..

C.sherman Johnson Terminal Locking Nuts - For check nut locking turnbuckles. Sold in pairs..

C.sherman Johnson Turnbuckle Jaw & Swage - Exclusively for lifeline applications. 1/4" pin dia. Lock nuts prevent loosening. Open body (O), and Tubular (T) styles.*Open body style with cotter pins, not lock nuts..

C.sherman Johnson Turnbuckle Spare Terminal RH Thread - Exclusively for lifeline applications. 1/4" pin dia. Lock nuts prevent loosening. Open body (O), and Tubular (T) styles.*Open body style with cotter pins, not lock nuts..

C.sherman Johnson Gate Stops - Normally installed over vinyl-coated lifelines. Used in place of interlocking gate eyes..

C.sherman Johnson Smooth Line Deck Toggle Turnbuckle - Deck Toggle Smooth Line Turnbuckle will mount to any flat surface. It can be through bolted by its two tabs and also has the ability to toggle 140 degrees..

C.sherman Johnson T-Style Deck Toggles - Used to terminate cable at a deck or bulkhead. T-bolt construction..

C.sherman Johnson Toggle Jaws - Can accept some off-axis alignment due to the toggle and clevis pin..

C.sherman Johnson Single Gate Eyes - Used at an attachment point for pelican hooks on gate openings. The eye on the standing part of the lifeline wire also prevents the lifelines from going slack when the gate is open..

C.sherman Johnson Small Boat Clevis Pin Kit - Assorted sizes of stainless-steel clevis and cotter pins. Small Boat kit contains 46 pieces ranging from 3/16"–5/16". Big Boat kit contains 36 pieces, ranging in from 5/16"–1/2"..

C.sherman Johnson Tubular Pelican Hooks - Traditionally styled pelican hooks with a hinged lock mechanism for security..

C.sherman Johnson Mini Snap Gate Hooks - New Mini Snap Gate Hook features "over-center" design with no load on the swinging hook when closed, allowing easy opening and closing. Ideal for lower lifelines and powerboats..

C.sherman Johnson Pulpit Anchor - Anchor any lifeline fitting. Fits 1"dia. rails and stanchions..

C.sherman Johnson "Captain Hook" Chain Snubbers - New "Captain Hook" Chain Snubbers can be used a few different ways:1. Use the claw and attached line to relieve tension from your windlass while anchored by snubbing the chain overboard and tying off the line to a cleat or samson post on deck.2. Use the snubber on deck for security to hold the chain in your anchor roller and tying off on a cleat while under way for piece of mind.3.

C.sherman Johnson Grab-N-Go Mooring Hook - This unique system makes grabbing a mooring ring on the first pass a sure thing. When ready to cast off, just pull the release loop with your boat hook and you are away! 316 stainless steel..

C.sherman Johnson Hand Crimp Tool - Precisely machined and hardened dies maximize the strength of hand crimp wire terminals. The resulting connection should retain 70% of the breaking strength of the wire..

C.sherman Johnson Pelican "Over-Center" Hook Body Only - For those that wish to replace their existing hooks-just match up the thread size. 3-1⁄2" long from end of body to inside bearing point of hook. Investment cast T-316 stainless steel..

C.sherman Johnson Spreader Halyard Kit - Spreader Halyard KitThis kit provides everything you need to add a flag halyard to your boat. Includes:.

C.sherman Johnson Stanchion-Mounted Bull's-Eye Fairleads - Mount without drilling on stanchion or base from 7/8" to1" diameter. Deluxe model has a stainless steel-bushed bulls-eye to minimize friction..

C.sherman Johnson Stanchion Terminals - Used where the cable needs to be terminated at the stanchion..

C.sherman Johnson T-Bolts with Toggle - 316 stainless steel with lefthand threads. Length is measured from bottom of cotter hole to center of clevis pin. Measure in Body/Pin is for each body and pin..

C.sherman Johnson Toe Rail Folding Cleat - 316 stainless movable cleats mount on all aluminum toe rails or 1-1/4" track and fold out of the way when not in use. A new folding triangle bail mounts on toe rail for attaching snatch blocks snap shackles, or lines..

C.sherman Johnson Turnbuckle Eye and Swage - Exclusively for lifeline applications. 1/4" pin dia. Lock nuts prevent loosening..