Cannon

Cannon Downrigger Terminal Kit - 6 pc. - Cannon Terminator Kit.

Cannon Rebate Cannon Mag 10 STX Electric Downrigger - Includes heavy-duty stainless steel telescopic boom, 150 lb.-test 316-grade stainless steel cable, swivel base, offshore saltwater line release, and rear rod holder. Model MAG 10 STX includes 250 feet of cable, a single rod holder, a swivel base, and short-stop. Retrieve rate: 250 fpm. Weight capacity: 20 lbs. Manufacturer model #: 1902305..

Cannon Digi-Troll 10 Downrigger - The Cannon® Digi-Troll&trade 10 Electric Downrigger features a full backlit keypad with integrated backlit LCD screen that gives you full control of your downrigger plus built-in electronics that interface with Humminbird® 1100, 900, 700, or Matrix series fishing systems, allowing downrigger control from the sonar display (requires CannonLink™ module, not included). Other features include ability to raise and lower downriggers from the sonar screen, cycle function that jigs weight up and down at a set depth/time interval, bottom tracking function using the fishfinder’s transducer, digital depth counter, easy spool access, plastic spool, 24''-53'' heavy duty telescopic boom, 400' cable, two dual axis adjustable rod holders,...

Cannon Scout Fire Safe - Loaded with firearm- and valuable-protecting features, including a massive, frame-reinforced 1" double-steel/composite door with truelock internal hinges; 1" active-locking bolts; a commercial-grade electronic lock protected by three layers of extra-hard steel plating; 12-gauge-steel unibody construction; and fire-rated at 1,200ºF for 30 minutes. A heat-activated door seal expands several times its size for complete smoke protection and insulation. The upholstery-finished interior has plenty of shelf space and a power pad with two 110-volt outlets, a USB port for electronics charging and a RJ45 Ethernet connection.

Cannon Downrigger Mounting Plates And Bases - The Cannon Downrigger Mounting Plates and Bases are available in three models. The Cannon Deck Plate features rugged aluminum construction. Reinforces Cannon bases and pedestal mounts installed on thin decks and gunwales. Built with machined aluminum and powder coated to resist corrosion. The Cannon UT/Marlin Base fits Uni-Troll and Marlin downriggers. The Mounting Base M10/M20/DTIV fits Mag 10, Mag 20 and Digi Troll..

Cannon Uni-Troll 5 St Downrigger - Maximize your time on the water with Cannon's high-speed retrieval mechanism that raises the weight in half the time with reduced cranking effort. Vertical spool design with clutch/brake system for controlled, one-handed descent. Three-digit depth counter. Ball storage hook prevents boat damage. Low-profile unit comes with a fully adjustable rod holder and line release. 24" heavy-duty stainless steel boom. Monofilament-ready stainless steel spool. Pre-spooled with 200-ft. stainless steel 150-lb.-test cable.

Cannon Digitroll 5 Downrigger - The Cannon® Digi-Troll™ 5 Electric Downrigger features built-in electronics that interface with Humminbird® 1100, 900, 700, or Matrix series fishing systems, allowing downrigger control from the sonar display (requires CannonLink™ module, not included). Other features include integrated touch pad controls, ability to raise and lower downriggers from the sonar screen, cycle function that jigs weight up and down at a set depth/time interval, bottom tracking function using the fishfinder’s transducer, plastic spool, 24''-53'' heavy duty telescopic boom, 400' cable, dual rod holder, swivel base, and Adjustable Positive Ion Control.

Cannon Mini-Troll Downrigger - Fish are attracted to a positive field of ions in the water. Cannon has now made this approach easier for anglers everywhere by equipping its electric downriggers with the means to create and maintain a positive field of ions that attracts fish (weights not included). Cannon® Mini-Troll™ Downrigger Accessory Kit sold separately and can be found through item search for number 268247. Horizontal manual reel and brakeCompact design ideal for canoes, jon boats and small watercraftPre-spooled with 100 ft. of 120-lb. test stainless steel cable.

Cannon Flush-Mount Power Port - Downrigger accessories make your fishing trip more enjoyable, and productive. This flush-mount power port allows quick thru-hull connection to a Cannon downrigger power cable. Watertight cover and gasket..

Cannon Replacement Cable - 7-strand downrigger cable made of 316 grade stainless steel..

Cannon Magnum 10 Stx Downrigger - This full-featured electric downrigger features a 24" to 53" telescopic boom, 250 ft. of stainless steel cable, mechanical linecounter, toggle-switch up/down, rod holder and single universal line release. It also has Cannon’s fish-attracting Fixed Positive Ion Control system..

Cannon Terminator Kit - The Cannon Terminator Kit works for any downrigger. It includes six crimpless terminators, six snap swivels and six cushion tops..

Cannon Rebate Cannon Uni-Troll 10 Manual Downrigger - The Cannon Uni-Troll 10 Manual Downrigger puts you in command of controlled depth fishing with a fast, efficient 2:1 retrieval speed and one-hand clutch deploy for controlling, precise bait positioning. A heavy-duty telescopic boom extends from 24" to 53" and an enclosed boom end pulley prevents line jumping. An easy-access universal mounting base is interchangeable with Cannon’s electric models. A dual-axis rod holder is fully adjustable from both front to back and side to side.

Cannon Clamp Mount - The Cannon Clamp Mount is perfect for mounting downriggers on small boats. Will only work with Easi-Troll™ or Mini-Mag™ downriggers, but will accept tab-lock base for mounting other models. Maximum clamp opening: 2". Base top: 4" x 4-1/4"..

Cannon Lake-Troll Downrigger - By integrating the results of constant research and development into its designs, Cannon remains a leader in downrigger technology. Cannon demonstrates its commitment to designs based on input from those who know and use downriggers. The result is high-quality, state-of-the-art depth-control systems with convenient features and intuitive operation that will be appreciated by all who use them. The Lake-Troll has a vertical spool design with a clutch/brake system for controlled, one-handed descent.

Cannon Easi-Troll St Downrigger - The Cannon Easi-Troll ST Manual Downrigger is a hardworking, durable unit that's ideal for smaller boats and fishermen just beginning to realize the advantages of fishing a downrigger. The Easi-Troll ST Downrigger features an innovative design with a 1.5:1 retrieval speed and one-hand clutch deploy that allows for controlled weight descent and accurate bait positioning. An easy-access universal mounting base is interchangeable with Cannon's electric models. A single axis rod holder is fully adjustable from front to back.

Cannon Quick Release - Even when the boat is bouncing around and your other releases are a chore to set, the Cannon Quick Release makes resetting your line quick and easy. Just snap your wire in and back to fishing without any line twisting, winding or looping to damage your line. Cannon's Quick Release is designed with an adjustable tension that lets anglers match line weight with fishing style..

Cannon Side-Mount Rod Holder - Sturdy side-mount rod holder from Cannon accommodates both spinning and baitcasting combos. Three-position configuration delivers fast rod pick-up. Rear-position cradle holds baitcasting reels and spinning reels. The middle cradle conforms to longer rod butts while shortening the amount of rod extending through the back of the holder..

Cannon Single-Rod Holder - Pin fits rear rod tube clamps that come with Cannon downriggers. You can adjust the angle for optimal performance. Corrosion-resistant..

Cannon Low-Profile Swivel Base - This Low-Profile Swivel Base is only 1-1/8" tall. It has six-point locking, including two 45° positions. 5" x 5" x 1-1/8". Screws included. Fits all Cannons except the Mini-Troll™. The Cannon Tab Lock Base is designed for small-body downriggers, Easi-Troll™ and Mini-Mag™. 5-3/4" x 5-1/8" x 1-3/8". Screws included. Available: Tab Lock, Low-Profile Swivel..

Cannon Mag 5 ST Electric Downrigger - The Cannon Mag 5 ST Electric Downrigger features a large-frame design for big water fishing that can handle up to a 20 lb. weight. Other features include easy access spool system, positive Ion Control that creates a fish-attracting electrical field around your boat, Short-Stop that safely stops weight retrieve at waterline, 24'' heavy-duty boom, plastic spool, 400' cable, dual axis adjustable rod holder, and three-digit depth counter. Plastic spool; 24" heavy-duty boom; 250' cable.

Cannon Stainless Steel Downrigger Bases - Cannon is known for its long-lasting downrigger mounting parts. Whether you are upgrading to a new boat or just want to move your downrigger around on your current boat, choose a base that suits your needs. All three bases are made from 316 stainless steel that will resist rusting, pitting and corroding. Available in:Move a downrigger for optimum trollingResists rust, pitting and corrosionSuper-strong 316 stainless steel.

Cannon Digitroll 5 Tournament Series - Ready for tournament-serious trolling, this keypad/software-controlled electric downrigger is Cannon Link compatible and features variable up-and-down speed, a digital linecounter, 24" to 53" telescopic stainless steel boom, removable stainless steel spool, 400 ft. of stainless steel cable, two single rod holders and two Offshore saltwater line releases. It also has Cannon’s fish-attracting adjustable Positive Ion Control system. Black swivel base..

Cannon Downrigger Cover White - Professional-grade covers guard against the elements with a secure Velcro closure and non-abrasive backing..