Chief

Chief KTG320 Triple Horizontal Grommet Mount Black - The Chief KTG320 Triple Horizontal Grommet Mount (Black) provides a rock solid, free-standing solution for graphic designers, broadcasters and other users who need to work with three side-by-side monitors. Provides ergonomic adjustability for hassle-free, fingertip positioning of each monitor. Heavy-duty, solid steel bolting plates and oversized pole for unmatched stabilityVESA 75 x 75 mm and 100 x 100 mm compatibleIntegrated cable managementConceal and protect cables using snap-on covers and cable clipIndependent adjustment of each screen for proper ergonomic alignmentScreen angle stays set in place until you decide to re-adjustCentris Technology provides smooth, fingertip tilt in all directionsTeardrop hole pattern makes mounting the...

Chief K1C250 KONTOUR Dynamic Column Clamp Single Arm Mount Dual Monitor Silver - The Chief K1C250 KONTOUR Dual Display Column Mount (Silver) uses gas-spring technology that allows you to easily adjust the height of the mount along the column, making it suitable for sitting or standing applications. Designed to hold 2 monitors, the Column Mount is can be installed next to a cubical wall or adjacent to a desk offering you a low profile mounting solution for your displays.

Chief CMA115 6" (152mm) Ceiling Plate Black - The UL-listed Chief CMA115 6" (152 mm) Ceiling Plate (Black) is designed for ease of installation with any height of drop ceiling. By using any length of standard NPT 1-1/2" pipe threaded both ends; you can extend the height capabilities to meet your needs. It can also be combined with any Chief CMS fixed or adjustable extension column to customize your installation..

Chief CMS0406 4-6' Adjustable Extension Column Silver - Threaded on both ends, the Chief CMS0406 4-6' Adjustable Extension Column (Silver) can be used with any 1.5" NPT accessory to lower a projector or flat panel display to a desired height. It includes a continuously adjustable notch for length changes (1" increments) without disassembly, aluminum construction for fast and easy installation and flow-through cable management with an integrated port for routing cables. Use in combination with any Chief 1.5" NPT ceiling plate or other accessoryProvides height adjustment in 1" incrementsConsists of 1.5" NPT column, threaded on both endsNotched design for adjustment without disassemblyIncludes set screw for add stability.

Chief JHSV Medium Flat Panel Ceiling Mount Silver - The Chief JHSV is a single-screen ceiling mount (Silver) for flat panel TVs that combines Chief's exclusive Centris tilt with quick ceiling mount installation. Easily route cables through 1.5" NPT extension columnPortrait and landscape mounting capabilityExclusive Centris Technology fingertip tilt self-adjusts to securely hold different display weightsPost-installation leveling with no tools necessarySet screw securityMSB interface bracket can be purchased separately for non-VESA compatible screensFast and easy screen positioning with lockdown capabilityScreen angle stays set in place until you decide to re-adjustUniversal models available for VESA 100 x 100 mm up to 400 x 400 mm mounting patterns.

Chief JHSVB Medium Flat Panel Ceiling Mount - The Chief JHSVB is a Ceiling Mount for flat panel monitors. This particular mount is a universal VESA mount. This mounting solution encompasses a variety of mounting patterns. Exclusive Centris Technology fingertip tilt self-adjusts to securely hold different display weightsFast and easy screen positioning with lockdown capabilityEasily route cables through 1.5" NPT extension columnMSB interface bracket can be purchased separately for non-VESA compatible screensVESA 100 x 100 mm, 200 x 100 mm, 200 x 200 mm, 300 x100 mm, 300 x 200 mm, or 400 x 200 mm compatiblePortrait and landscape mounting capabilityScreen angle stays set in place until you decide to...

Chief KCD320 Dual Arm Desk Mount Triple Monitor Black - The Chief KCD320 Triple Monitor Swing Arm Desk Mount (Black) makes it easy to ergonomically mount three displays on your desktop with simple fingertip angle adjustments. Quick, easy cable management with infinitely adjustable cable management clipsScreen angle stays set until you decide to re-adjustCentris Technology provides smooth, fingertip tilt in all directionsIndependently adjustable tension at pivot points for customized control; tension can be optimized for touchscreen useClamp option allows mount to be installed from the top of the mounting surfaceClean look with minimal hardware visible from underside of work surfaceVESA 75 x 75 mm and 100 x 100 mm compatible...

Chief KITPD0203 Universal Projector Ceiling Mount Kit White - The Chief KITPD0203 Universal Projector Ceiling Mount Kit (White) is used to mount a projector to a ceiling. The kit includes Chief's RPAUW Universal Projector Mount, CMS0203W 2-3' Extension Column and CMS115W Ceiling Plate. The RPAUW mount includes a universal interface bracket, making it compatible with 95% of inverted projectors on the market. This makes it perfect for installers who are uncertain of a customer's projector type.

Chief KWD230 Dual Vertical Monitor Swing Arm Wall Mount 17 lbs Load Capacity Silver - The Chief KWD230 Dual Vertical Monitor Swing Arm Wall Mount (Silver) lets you mount the screens vertically and lock them in the same plane for viewing convenience. It is ideal for home and office installations of two flat panel displays (up to 17 lb per monitor). The KWD230 includes a custom interface bracket making it compatible with VESA-compliant displays. However for non-VESA compliant displays, an FSB-series interface bracket might be required.

Chief PDR2000 Large Flat Panel Swing Arm Wall Mount 37" Extension without Interface Silver - View large flat panel displays up to 71" or 200 lbs. from any angle with the Chief PDR2000 Dual Swing-Arm Wall Mount (Silver). This custom mounting solution swings out and extends up to 37" from the wall, collapsing to only 2-7/8" when in home position. The PDR2000 is wall-mounted, rugged, versatile and installer-friendly. It has vertical, lateral and rotational tilt tension adjustments.

Chief TS318TU Medium THINSTALL Dual Swing Arm Wall Mount 18" Extension 75 lbs Load Capacity Dual Stud - The Chief TS318TU Medium THINSTALL Dual Swing Arm Wall Mount (Dual Stud) provides lightweight, low-profile installation options for virtually any application. The TS318TU is a universal, full-motion mount designed for flat panel televisions from 26" to 52" and up to 75 pounds. This unit includes built-in cable management, post-installation leveling, 15 degrees of tilt and reaches 18" from the wall when fully extended.

Chief WM130 Large Short Throw Single Stud Wall Mount 28.0-53" Extension 25 lbs Load Capacity - The Chief WM130 Large Short Throw Single Stud Wall Mount is an ideal way to maximize the close-up capabilities of your short throw projector while saving room space and locating the projector above the audience. The arm mounts securely to a single stud via the included wall plate and included hardware, supporting weights up to 25 lbs. It is compatible with RPA standard, RPA Elite, RPA Mini and RPA Mini Elite mounts.

Chief CMS0406 4-6' Adjustable Extension Column White - Threaded on both ends, the Chief CMS0406 4-6' Adjustable Extension Column (White) can be used with any 1.5" NPT accessory to lower a projector or flat panel display to a desired height. It includes a continuously adjustable notch for length changes (1" increments) without disassembly, aluminum construction for fast and easy installation and flow-through cable management with an integrated port for routing cables. Includes set screw for add stabilityProvides height adjustment in 1" incrementsUse in combination with any Chief 1.5" NPT ceiling plate or other accessoryNotched design for adjustment without disassemblyConsists of 1.5" NPT column, threaded on both ends.

Built-in cable management with snap-on cable coversVESA 75 x 75 mm and 100 x 100 mm compatiblePortrait and landscape rotation and side-to-side pivotExclusive Centris Technology gravity-centered tilt self-adjusts to securely hold different display weights.

Chief FHP18110 Small Flat Panel Ceiling Mount Kit for 10-26" Flat Panel Displays 40 lbs Load Capacity Silver - The Chief FHP18110 Small Flat Panel Ceiling Mount Kit (Silver) is a sleek, all-metal Centris mounting system designed for all VESA 75 x 75mm and 100 x 100mm compliant displays. The mount includes an adjustable column, cable management and a variety of screen positioning options. The slender column on the mount is finely finished with easy adjustment in 1-inch increments.

Chief FVS200 8" FUSION Above Video Conferencing Camera Shelf 10 lbs Load Capacity - The Chief FVS200 is a 8" small camera shelf for FUSION fixed or tilt wall mount installations. This shelf mounts above the flat panel allowing for excellent video conferencing capabilities..

Chief KCB110 Height-Adjustable Triple Arm Desk Mount Single Monitor Black - The Chief KCB110 Flat Panel Height-Adjustable Triple Arm Desk Mount (Single Monitor, Black) provides height adjustment and extension for ideal viewing placement. Clamp option allows mount to be installed from the top of the mounting surfaceBuilt-in cable management for a clean installationCentris Fingertip Tilt provides smooth tilt adjustment in all directionsFingertip height adjustment with customizable tensionPortrait and landscape rotation and side-to-side pivotVESA 75 x 75mm and 100 x 100 mm compliantClean look with minimal hardware visible from underside of work surfaceAdjustable tension in individual pivot points; touchscreen compatibleSmooth extension to achieve ideal viewing angleEasy installation with teardrop hole pattern,...

Universal VESA bracket that fits the following mounting patterns: 100 x 100mm, 200 x 100mm, 200 x 200mm, 300 x 100mm, 300 x 200mm and 400 x 400mmFor JWDV, JWSV, JWPV, JHSV & JWDSKV MountsCompatible with 26-45" Displays.

Smooth extension up to 21" (533 mm) to achieve ideal viewing angleNo header or footer necessaryBack of TV sits close to the wall (0.1" for VESA 100 x 100mm screens and 0.65" for screens having up to 400 x 400mm patterns)Low profile, designed to ensure that the mount remains concealed behind the screenUsed with the MAC501 installed in between 16" on center studsCentris Technology provides smooth, fingertip tilt in all directions.

Chief KCD320 Triple Monitor Swing Arm Desk Mount 10 lbs Load Capacity Silver - The Chief KCD320S Triple Monitor Swing Arm Desk Mount (Silver) makes it easy to ergonomically mount three displays on your desktop with simple fingertip angle adjustments. Clamp option allows mount to be installed from the top of the mounting surfaceClean look with minimal hardware visible from underside of work surfaceVESA 75 x 75 mm and 100 x 100 mm compliant (interface brackets available for non-VESA compliant displays)Independently adjustable tension at pivot points for customized control; tension can be optimized for touchscreen useQuick, easy cable management with infinitely adjustable cable management clipsScreen angle stays set until you...

Chief KFA325 Widescreen Triple Monitor Cart/Stand Accessory Silver - Max 25" Wide Each Monitor - Use the Chief KFA325 Widescreen Triple Monitor Cart/Stand Accessory (Silver)allows easy mounting of three widescreen monitors on a cart or stand. Supports three widescreen monitors up to 25" (635 mm) wide side-by-side.

Chief KITMSAPC1 Fusion Universal Flat Panel Fixed Wall Mount Kit for 26-47" Displays - The Chief KITMSAPC1 Fusion Universal Flat Panel Fixed Wall Mount Kit for 26-47" Displays offers everything you'll need to mount your TV with style backed by surge protection and noise filtering. The easy-to-install mount is designed to be anchored into a wall stud and features such safety elements as ClickConnect, an audible confirmation that your display is engaged and properly seated in the mount.

Flexible installation! Allows installation on pre-existing poles of 1.5 - 2" (38 - 51mm) outer diametersFriction-adjustable pivot points for customized movementEasy height adjustment by adjusting a single screw.

Chief KSA1019 Centris Turntite Head Accessory Silver - The Chief KSA1019 is a Centris head accessory (Silver) that can be used on any Chief K-series monitor product. Providing external tilt/roll friction adjustment for optimizing screen movement, the KSA1019B is a perfect fit for touchscreen applications. Perfect fit for touchscreen applications when users want to lock the tiltCompatible with any Chief K-series monitor productCentris Technology for fingertip screen placementExternal tilt control for optimizing screen movementAllows 15deg. of rotation.