T-H Marine

T-H Marine Shark Eye Light Set Pair - Shark eye navigation lights meet ABYC A-16 and USCG 1NM. NMMA type accepted. Stainless steel base. Tin wire..

T-H Marine Battery Trays With Stainless Buckle - These battery trays are original equipment in over 80% of all new boats under 25 ft. Includes a polypropylene hold-down strap with a positive locking quick-disconnect buckle that fits into the molded base. Come with the addition of a stainless steel buckle for maximum strength and corrosion resistance. Three single-tray models. Available:.

T-H Marine Th Marine Designer Series Storage Hatches - Cover the access to horizontal or vertical storage areas in an attractive and economical fashion. These watertight hatches have lid-overlapping frames with two separate seals on the frame and lid. There are no visible fasteners for added security. The stainless hinges are integrated into the frames and facilitate 180° opening. The unique cam-type latch system ensures a positive watertight seal. Constructed of a super-tough structurally-engineered reinforced polypropylene that easily withstands being stepped on in the most extreme conditions..

T-H Marine 90 Degree Through-Hull Fittings - These Through-Hull 90° fittings are crafted from high-quality, durable white nylon. Perfect to replace leaking, plugged or slow-flowing fittings - even add a new drain or hook up a livewell. Available: 3/4", 1-1/8" to 1-1/4", 1-1/2"..

T-H Marine Transom Trim Control - Provides a weatherproof tilt control system at the stern area of the boat to facilitate placing motor support in position with one person. Switch can also be used for remote adjustment of hydraulic jack plates. The switch housing is molded black plastic with raised white letters and may be mounted on any flat surface. It comes completely wired with installation instructions. Comes with 18'' pigtail wire..

T-H Marine 4" Atlas Hydraulic Jack Plate - T-H Marine introduces the next generation in jack plate design, built for the heaviest and most powerful V6 engines on the market today, even the big four strokes. Its innovative high-tech engineered polymer rod and slot lifting design guarantees trouble-free action. This plate also features the newest concept in one-piece hydraulics from the most respected name in hydraulic design, providing the best of all worlds: Speed and self-contained lifting action.

T-H Marine Livewell Light - This powerful Livewell Light is totally waterproof and virtually indestructible. Molded from clear acrylic and gasketed for absolute water holdout, this light's bulb and socket pop in from behind. Mounts in your livewell like any thru-hull fitting, the Livewell Light is quick, easy, and very convenient for night fishing..

T-H Marine Locking Sure Seal Waterproof Storage Hatches - These hatches are an attractive and economical way to access storage areas. Each is waterproof and equipped with two seals on the frame and lid. The fasteners are hidden, while the hinges are corrosionproof and allow 180° opening. Colors: Ivory, White (shown), Dark Gray. Equipped with 2 waterproof seals180° openingHidden fastenersCorrosion-resistant hingesLocking lid.

T-H Marine Pro-Air System Air Livewell Pump - The Pro-Air System air pump is capable of aerating both front and rear livewells at the same time. It comes complete with pump, 2 air stone mounts, 2 air stones, an attractive switch-panel with a pump control switch, and 20' of air line tubing. 12V DC application..

T-H Marine Push Together Scupper - Snap-lock mating ribs pieces together for a secure installation. The male portion can be shortened, to accommodate thinner hulls..

T-H Marine Splash Well Drain - T-H Marine’s Splash Well Drains are molded from a high-strength material that offers some flex to allow for imperfect hole saw cuts and installation impacts. These high-quality Splash Well Drain tubes are far superior to other molded tubes on the market that are very susceptible to breaking. These drains simply snap together and are impossible to pull apart. T-H Marine's tubes allow for a very simple installation with only a 1'' diameter hole and a small amount of silicone sealer..

T-H Marine Sure-Seal Hatches - These innovative access hatches and deck plates provide an attractive, economical way to access horizontal and vertical storage area. Because the lid overlaps the frame, all models are completely waterproof. Fasteners are concealed for a clean installation. Two separate seals on frame and lid ensure that water won't get in. The corrosion-free, integrated hinges allow 180 degree opening. Mfr.'s one year limited warranty. Available Polar White, Sand Shell and Light Gray..

T-H Marine T-H Cooler Hold Down Kit - Whether it's holding bait, beverages, food or fish, your cooler is an important part of on-the-water fun. By keeping it safely secured through rough seas and tight turns, you'll prevent damage to both the cooler and the boat. Corner brackets with recessed fasteners easily install on most flat surfaces. Nylon bungee straps firmly hold the cooler with stainless steel center hooks. Includes four corner brackets and two bungee straps.

T-H Marine T-H Hatch Latch - With an easy-to-grip, flip-up, two-finger handle, these waterproof latches mount in aluminum, fiberglass and carpeted lids up to 3/4" thick. Powder-coated steel pawls withstand the elements through years of use and come in a straight or offset design to best fit your boat's storage compartments. The waterproof O-ring seal keeps moisture from penetrating through to your gear. Available in a locking or non-locking version. Mounts in a 2-3/8" to 2-1/2" hole.

T-H Marine Universal Hot Foot Throttle System - The Hot Foot™ connects to the boat floor and works just like a gas pedal in an automobile, enabling better speed control and safer boat handling. Top tournament pros will tell you it's one of the best safety features you can have on your boat, especially in rough water, because both hands can be on the wheel, rather than one on the wheel and the other on the throttle.

T-H Marine ''Hot Trim'' Foot Trim Control - Floor-mounted trim is an excellent safety item in boat performance accessories. Mounts in floor of boat, allowing operator to trim engine with foot. Black matte unit comes prewired with wiring instructions to connect it to existing trim wiring..

T-H Marine Aerator Spray Head/Wash Down Combo - Here's an easy way to accomplish two important functions on your boat. The aerator spray head provides vital refreshing of the water in a livewell to ensure bait and your catch stay alive. And when your day on the water comes to a successful end, just slip off the head and attach a hose to wash out the livewell, clean off the deck or rinse muck off the anchor chain and anchor.

T-H Marine Anchor Handle Lid Lock - Looking for attractive marine hardware? This Anchor Handle Lid Lock from T-H Marine fits aluminum, fiberglass and carpeted lids. Features include a sure grip two-finger handle, a gasket for smooth surface applications, a toothed and Double-D shaped mounting for carpeted lids, a waterproof O-ring, a stainless steel stem, and powder-coated steel pawls – both straight and offset. Single hex nut installation is quick and easy. Mounts in lids up to ¾" thick.

T-H Marine Automatic Aerator Control - This automatic aerator control provides a source of oxygen-rich water to your live well automatically. This unit features a solid-state timer with adjustable off times to adjust to varying conditions. Easily adaptable to existing systems. Requires a 3" diameter round hole or a 2 1/2" square hole for mounting. Simply connect wiring according to instructions provided. Front panel is 3 1/4 x 3 1/4 and requires only 3" behind panel.

T-H Marine Elbow Hose Fitting - Made from high-quality corrosion resistant materials, this durable Elbow Hose Fitting from T-H Marine provides seamless 90 degree connections for 3/4'' marine hoses. This Elbow Hose Fitting is threaded and is suitable for a variety of applications; plumbing or live wells connections. Color: Black. Made in USA..

T-H Marine Flow-Max Ball Scupper - You'll never have to worry about slow drainage or clogs with this ball scupper from Flow-Max™. With a large 1-1/8" drain, it provides faster, more efficient drainage than similar products. And when debris does accumulate, all you have to do is twist it off to remove the obstructions, then slip it back into place. The ball scupper replaces worn-out flapper scuppers, and it easily retrofits all hole patterns. Each comes with a stainless steel lock screw for safety, and it is seal-slotted to fit over a 1-1/4" motorwell tube.

T-H Marine Hi-Jacker Fixed Jack Plate - This tough 3/8" thick aluminum bracket provides an inexpensive solution to mounting a long shaft outboard to a short transom. .

T-H Marine Ranger Style 50-Amp Circuit Breaker - The Ranger Style Circuit Breaker is a 50-amp manual breaker for 12-, 24- or 36-volt trolling motors. Includes 30", 8-gauge lead wire, four screws and loose terminal lug to crimp to 8-gauge wire in your boat..

T-H Marine Screw In Deck Plate - These innovative deck plates provide an attractive, economical way to access horizontal and vertical storage areas. They have two seals and an O-ring for complete waterproofness. Resist UV and chemical degradation..